Assembling range group

AR26.31-B-3201TB

12.02.16

Manual transmission 715.575 with Vehicle 958.0, 958.1 with CODE G79 (Control code, single-H shift mechanism)

Manual transmission 715.576 with Vehicle 958.0, 958.2 except CODE G79 (Control code, single-H shift mechanism)

B26.31-0010-09

1 Planetary set

2 Sliding shoes

3 Bracket fork

4 Piston rod

5 Power piston

6 Shifting cylinder for multiplier group without single-H drive control Code (G79)

7 Shifting cylinder for multiplier group with single-H drive control Code (G79)

9 Rear case

10 Radial retainer

11 Bushing

12  Chuck

13 Locking ring

14 grooved ball bearing

16 Pulse star

17 Radial retainer

18 Output flange

19 Pivot Pin

20 Plug

21 Seal ring

22 Oil filter

23 Spring

24 Oil filter liner

	Assemble
1	Assemble the planetary set (1)		AR26.50-B-3102TB
2	Install the radial retainer (10) until the chuck stop (12)	 Install the seal lip with spring, towards the inside (oil side).
		Apply synthetic grease to the radial retainer (10).	*BR00.45-B-1021-06A
		 Chuck	*714589051500
3	Install the liner (11) until the chuck stop (12)	 Chuck	*714589051500
4	Install the oil filter liner (24)	Only when replacing the rear case (9).
5	Install the oil filter (22), the spring (23), the sealing ring (21) and the plug (20)	 Install the guide cam in the oil filter (22) towards the plug (20).
			*BA26.56-B-1001-01B
6	Install the radial retainer (17)	 Apply synthetic grease to the radial retainer (17) sealing lip.	*BR00.45-B-1021-06A
		 Chuck	*750589011500
		 Adapter ring	*715589166300
7	Install the pulses star (16), the grooved ball bearing (14), the lock ring (13) in the rear case (9)
8	Install the sliding shoes (2) in the governor fork (3) and install in the planetary set (1)	The markings (arrows) on the governor fork (3) should be facing the exit.
Danger!	Risk of injury on the skin or in the eyes by handling hot and incandescent objects	Wear gloves, protective clothes and goggles.	AS00.00-B-0002-01A
9	Heat the grooved ball bearing (14) approx. 80 °C and install it	Use an appropriate instrument to measure the temperature.
10	Install the rear case (9) with the heated grooved ball bearing (14), in the planetary set (1)	 The grooved ball bearing (14) should fit the rear case (9) inner housing.
11	Install the piston rod (4) with the power piston (5)	The coupling fork (3) should install in the piston rod notch (4) and the sliding shoes (2) should fit into the coupling mouth sleeve.
12	Install the pivot pin (19)	 Install the pivot pin with chemical locking.	*BR00.45-B-1033-02B
			*BA26.31-B-1001-01B
13.1	Install the shifting cylinder from the multiplier group (6)	 Vehicles without Code (G79), single-H drive control	AR26.18-B-3100TC
13.2	Install the shifting cylinder from the multiplier group (7)	 Vehicles with Code (G79), single-H drive control	AR26.18-B-3100TD
14	Install the output flange (18)		AR26.40-B-0007TD
15	Install the multiplier group		AR26.31-B-3102TB

Range group

Número	Denominação			Gearboxes 715.575/576


BA26.31-B-1001-01B	Selector fork bearing pin in the housing	M20	Nm	120
		M27	Nm	180

Transmission oil filter

Número	Denominação			Gearbox 715.575/576


BA26.56-B-1001-01B	Oil strainer stopper	M38X1.5	Nm	-
		42X1.5	Nm	120

714 589 05 15 00

Chuck

750 589 01 15 00

Chuck

715 589 16 63 00

Adapter ring

Produtos para reparos

Número	Denominação	Número de pedido
BR00.45-B-1033-02B	Loctite 243	Henkel Loctite

Produtos para reparos

Número	Denominação	Número de pedido
BR00.45-B-1021-06A	Synthetic grease	A 001 989 32 51

Referenzierte Dokumente