AR26.18-B-3100TC | Removing/installing range group shift cylinder | 12.02.16 |
Manual transmission 715.576 with Vehicle 958.0, 958.2 except CODE G79 (Control code, single-H shift mechanism)
W26.18-1009-06
1 Sealing ring with double groove
2 Sealing ring (89.5 x 3)
3. Shifting Cylinder
4 Sealing ring (5 x 3)
5 Power piston
6 Sealing ring (96 x 1.5)
44 "Low" speed group connector for GP
45 "High" speed group connector for GP
| Remove | ||
1 | Remove the shifting cylinder (3) or (7) compressed air piping | ||
2 | Put the multiplier group power piston (5) in “low” position | For that purpose, pressurize the multiplier group through the shifting cylinder (3) to position "low" (44). | |
3 | Remove the shifting cylinder (3) | ||
4 | Remove the seal rings (2, 4 and 6) | ||
5 | Remove the double groove (1) sealing ring from the power piston (5) | ||
| Install | ||
6 | Install the double groove (1) sealing ring in the power piston (5) | Apply synthetic grease between the sealing ring (1) sealing lips. | |
7 | Install a new sealing ring (4) in the gearbox (rear case) | Apply synthetic grease to the seal ring (4). | |
8 | Install the sealing ring (2, 6) in the shifting cylinder (3) | Apply synthetic grease to the seal ring (2, 6). | |
| The seal in the multiplier group shifting cylinder or in the multiplier group module changed | ||
9 | Install the shifting cylinder (3) | | |
10 | Install the pneumatic piping, in the "low" speed group connector (44) and "high" (45) from the shifting cylinder (3) |
Transmission pneumatic system
Número | Denominação | Gearboxes 715.5 | |||
BA26.18-B-1006-01B | Bolts of the gear command cylinder in the gearbox | M10 | Nm | 60 | |
M12 | Nm | 70 | |||
Produtos para reparos
Número | Denominação | Número de pedido |
BR00.45-B-1021-06A | Synthetic grease | A 001 989 32 51 |
Referenzierte Dokumente
- ar4210b0900ta Steckkupplung Druckluft aus-, einbauen
- bt2618b000101a