AR26.18-B-3100TD | Removing/installing range group shift cylinder | 12.02.16 |
Manual transmission 715.575 with Vehicle 958.0, 958.1 with CODE G79 (Control code, single-H shift mechanism)
B26.18-0026-06
1 Sealing ring with double groove
2 Sealing ring (89.5 x 3)
3. Control cylinder
4 Sealing ring (5 x 3)
5 Control plunger
6 Sealing ring (96 x 1.5)
7 Electrical connector
| Removal | ||
1 | Remove compressed air tubing from control cylinder (3) | ||
2 | Disconnect electric connector (7) | ||
3 | Remove the control cylinder (3) | ||
4 | Remove sealing rings (2, 4, and 6) | ||
5 | Remove sealing ring with double groove (1) from control plunger (5) | ||
| Installation | ||
6 | Install sealing ring with double groove (1) on control plunger (5) | Apply synthetic grease between sealing lips of sealing ring (1). | |
7 | Install new sealing ring (4) on transmission (rear housing) | Apply synthetic grease to sealing ring (4). | |
8 | Mount sealing ring (2, 6) on control cylinder (3) | Apply synthetic grease to sealing ring (2, 6). | |
| Multiplier group or multiplier group module control cylinder with modified sealing | ||
9 | Install control cylinder (3) | | |
10 | Connect electric connector (7) |
Transmission pneumatic system
Número | Denominação | Gearboxes 715.5 | |||
BA26.18-B-1006-01B | Bolts of the gear command cylinder in the gearbox | M10 | Nm | 60 | |
M12 | Nm | 70 | |||
Produtos para reparos
Número | Denominação | Número de pedido |
BR00.45-B-1021-06A | Synthetic grease | A 001 989 32 51 |
Referenzierte Dokumente
- ar4210b0900ta Steckkupplung Druckluft aus-, einbauen
- bt2618b000101a