AR09.41-B-8620B | Remove/install charge air ducts | 12.02.16 |
Cumbustion engine 904.925
Cumbustion engine 904.965
B09.41-0004-06
1 Clamp
2 O-ring
3 After cooling pipe to the intake manifold
4 Hose (black)
5 Wire rope
6 Screw
7 Bracket
8 Screw
9 Bracket
10 Cooling pipe
| Remove and install | ||
Danger! | Risk of injury by trapping and crushing when tilting the cabin | During back and forth cab tilting, stay away from tilting area and take preventive measures to avoid non-authorized people from entering tilting area. Always tilt the cab to its final position and secure it with the safety device. | |
1.1 | Tilt the cab. | Trucks with forward cab. | |
Danger! | Risk of injury by trapping and crushing when opening and closing the engine hood | Keep area clear of people and objects during hood tilting. | |
1.2 | Tilting the engine hood. | Trucks with conventional cab. | |
2 | Remove the wire rope (5) | Install: Screwed the nut until wire rope (5) gets distended, however, tension free. | |
3 | Remove the hose (4) | Install: Do not invert the hoses.The black hose (4) must be set up on the connection between air after cooling and air distribution manifold (3) and red hose between air after cooling and turbocharger. | |
| Directions to assembly the air after cooling hoses | ||
| |||
4 | Remove the support (9) from air distribution collector (3) | Do not remove the pipe (10). | |
5 | Remove the support (7) | ||
6 | Remove the screws (6/8) | ||
7 | Release the clamp (1), disconnect and remove the collector (3) | To avoid impurities entry, protect the supercharging air collector nozzle and air after cooling. Install: Replace the O-ring (2). | |
8 | Install in reverse order |
Charge air pipe/charge air cooling
Referenzierte Dokumente
- ah0941b000101a Hinweise für den Einbau der Ladeluftschläuche nach dem Ladeluftkühler
- ar6080b0010b Fahrerhaus in Reparaturstellung kippen, zurückkippen
- ar8840b1000a
- as6080b000101a Verletzungsgefahr durch Klemmen und Quetschen beim Kippen des Fahrerhauses
- as8840b000101a