Workshop equipment
WE58.40-Z-1001-03A | Drill (electric/pneumatic) |
WE58.40-Z-1003-03A | Angle grinder (electric/pneumatic) |
WE58.40-Z-1004-03A | Body saw (electric/pneumatic) |
Repair materials
Number | Designation | Order number |
BR00.45-Z-1001-07A | Zinc dust paint suitable for spot welding | A 000 986 34 42 |
D61.10-0069-06
1 Mark separation line (11) at a distance of a = 95 mm measured from cutout (13) and at a distance of b = 100 mm measured from hole 12 on front floor.
2 Mark separation line (14) on center of front floor (1).
3 Separate front floor section 82) along separation lines (11 and 14).
D61.10-0070-09
4 Mark holes in areas (D-R) as follows:
D61.10-0075-08
5 Mark 30 holes+) at a width of c = 470 mm in area (D) as follows:
6 Mark auxiliary lines measured from center of cutouts (arrows).
7 Mark first hole at a distance d = 50 mm measured from cutout (arrow), mark remaining holes at a distance of
e = 30 mm each.
8 Mark 3 holes+) at a distance of f = 15 mm measured from outer edge of cutout (arrow).
D61.10-0077-03
D61.10-0076-03
9 Mark 6 holes (+) in area (F) as follows:
10 Mark auxiliary lines measured from center of recess (arrow) and holes (+) with the following gaps:
g=20 mm, h=50 mm, i=90 mm,
j=20 mm, k=70 mm, l=110 mm.
11 Mark 7 holes (+) in area (G) as follows:
12 Mark auxiliary line measured from center of cutout (arrows) and mark holes (+) with the following gaps:
m=30 mm, n=80 mm, o=110 mm,
p=140 mm, q=170 mm, r=230 mm,
s=260 mm.
13 Mark 2 holes (+) in area (H) measured from cutout (arrow) as follows:
t=25 mm, u=75 mm.
D61.10-0079-03
D61.10-0078-03
14 Mark 22 holes (+) in area (J) as follows:
15 Mark auxiliary lines at a distance of
c1 = 25 mm and d1 = 60 mm measured from center of hole (arrow).
16 Mark hole at a distance of f1 = 50 mm measured from outer edge, mark remaining holes at a distance of g1=30 mm each.
17 Mark 2 holes (+) in area (K) as follows:
18 Mark first hole on auxiliary line at height of outer edge.
19 Mark second hole at a distance of h1=30 mm measured from outer edge.
D61.10-0080-05
20 Mark 8 holes (+) in area (L) as follows:
21 Mark auxiliary lines at a distance of
i1 = 50 mm and j1 = 150 mm measured from edge (arrow) and mark holes (+) with the following gaps:
k1=20 mm, l1=80 mm,
m1=120 mm, n1=160 mm
D61.10-0081-06
22 Mark 6 holes (+) in area (M) as follows:
23 Mark auxiliary lines at a distance of o1=110 mm measured from cutout (arrow) and a distance of p1=180 mm measured from edge (arrow).
24 Mark first hole at a distance of
q1 = 90 mm measured from outer edge of cutout (arrow).
25 Mark remaining holes at a distance
of r1=40 mm each, whereby the last hole should be marked offset from
the auxiliary line at a distance
of s1 = 20 mm.
D61.10-0082-06
26 Marker contours for spring strut mount (15) as follows:
27 Mark contour 16 at a distance of t1=145 mm measured from outer edge (arrow) and at a distance of
u1 = 25 mm measured from cutout (arrow).
28 Mark contour 17 at a distance of
v1 = 20 mm measured from cutout (arrow).
29 Mark auxiliary line 18 circumferen-tially at a distance of w1 = 15 mm measured from contour lines.
30 Mark 3 holes (+ at a uniform distance in area (N).
D61.10-0083-06
31 Mark holes (+) in center between marked contours and auxiliary lines as follows.
32 Mark 12 holes (+) in areas (O and P) at a distance of t1=30 mm.
33 Mark 5 holes (+) at a uniform distance in area (Q).
34 Mark 3 holes (+)at a uniform distance in area (R).
35 Center-punch all marked holes (+) and drill 6 mm dia. holes .
D61.10-0084-09
36 Grind front floor section (2) down to bare metal on both sides in area of drilled holes and in area (S) and coat with zinc dust paint.
37 Grind front floor section (2) down in areas (T and U) and coat with zinc dust paint.