AR60.80-W-1100E | Remove/install cab telescopic ram | 14.3.02 |
MODEL 950.0## /1## /2## /3##, 952.0## /1## /2## /3##, 953.1## /3##, 954.0## /1## /2## ## as of 587772 with BODY 942.899
W60.80-1084-12
Shown on cab with two-cylinder version
1 Cab telescopic ram
2 Hydraulic lines
3 Nut
4 Bearing pin
W60.80-1083-12
1 Cab telescopic ram
5 Split pin
Modification notes
| Remove/Install | ||
1 | Lift vehicle at front axle and secure against lowering with securing blocks | Only on vehicles with code (A00) Front axle, pneumatically suspended. | |
2 | Open front flap | ||
3 | Remove cotter pin (5) from upper telescopic ram bearing | ||
4 | Mark hydraulic lines (2) and remove from cab telescopic ram (1) | Catch hydraulic oil running out. | |
5 | Unscrew nut (3) from bottom telescopic ram bearing and remove retaining bolt | ||
| |||
6 | Remove bearing pin (4) from bottom telescopic ram bearing | ||
7 | Remove cab telescopic ram (1) | ||
8 | Install in the reverse order | ||
9 | Bleed cab tilt hydraulic system | Unscrew plug from tilting pump and add hydraulic oil up to top edge of filling opening. | |
When the filling opening is open tilt cab toward front and back to drive position Catch hydraulic oil running out. | |||
10 | Check connections on cab telescopic ram for leakage |
Cab mounting