Attach fastening straps to cab

Cable harness

970 589 00 31 00

W60.80-1077-06

Shown on model 944

 Securing cab for work during which the cab has to be tilted further forward or back with a crane or forklift:

1 Remove rubber plugs (1) from openings on end plate.

2 Insert the two locking fingers (2) of the  cable harness into the openings on the end plate and arrest behind reinforced inner plate.

 Insert the locking finger (2) side on which the locking lug is located further outside.

W60.80-1078-06

3  Hook cable harness (3) into crane hook

4 Fasten other end of cable harness (3) at suitable point

5 Tension cable harness (3) by tilting cab beyond top dead center

6 Also tension cable harness (3) with crane.

 Securing cab for work during which it is not necessary to move the cab from the tilting position or repair position:

7 Remove rubber stoppers (1) from openings on end plate.

8 Insert the two locking fingers (2) of the cable harness (3) into the openings on the end plate and arrest behind reinforced inner plate

 Insert the locking finger (2) side on which the locking lug is located further outside.

9 Fasten other end of cable harness (3) at suitable point

10 Tension cable harness (3) by tilting cab beyond top dead center