ar5425p2802rt

Remove/install steering column module

Type ar · emne 54.25 · version 0201 · 2012-02-23

Gælder for: MODEL 251

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 54 El-system, udrustning og instrumenter › 54.25 Kontakter — Serie 251

EinPAS 25 bilens ledningsnet/netværk/multifunktion › 25.15 netværk/multifunktion › 25.15.11 Styreenhed/modul/relæ — Serie 251

AR54.25-P-2802RT

Remove/install steering column module

16.2.12

MODEL 251

Remove/install steering column module

P54.25-4458-06

Shown on vehicle with code (441) Electrically adjustable steering column

1 Electrical connector

N80 Steering column module

Modification notes

25.11.08

Perform initialization of DTR control unit after replacing steering column tube module, added

Step 8

Remove/install

Danger!

Risk of injury caused by performing testing or repair work on airbag or emergency tensioning retractor units.

Store airbag units with deployment side facing up; do not expose to temperatures greater than 100 °C. When working on these units, disconnect the power supply.

AS91.00-Z-0001-01A

Danger!

Risk of explosion caused by escaping oxyhydrogen gas. Risk of injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte (contains diluted sulfuric acid) or metal spatter due to short circuit. Risk of burn injuries caused by short circuit. Risk of poisoning caused by swallowing battery electrolyte (contains diluted sulfuric acid) or absorption of lead over the skin or orifices

No fire, sparks, open flames or smoking.

Wear acid-resistant gloves and clothing and safety glasses with side guards.

Do not place any conductive objects on the battery and avoid any short circuit from battery positive to ground.

Only fill liquid battery electrolyte (diluted sulfuric acid) into suitable and appropriately marked containers.

AS54.10-Z-0001-01A

1

Disconnect battery ground line

AR54.10-P-0003RT

2

Remove driver airbag unit

Up to model year 09

AR91.60-P-0660RT

As of model year 09

AR91.60-P-0660GZA

3

Remove steering wheel

AR46.10-P-0100RT

4

Detach mounting screw (arrow) of steering column module (N80)

5

Carefully detach steering column module (N80) from steering column

The electrical connector (1) disconnects if the steering column module (N80) is detached from the steering column.

Installation: Do not damage the electrical connector (1)!

6

Install in the reverse order

7

Perform basic programming

AR00.19-P-0200RT

8

Perform initialization of DTR control unit with STAR DIAGNOSIS

After replacing steering column tube module (N80) on vehicles with code (219) Distronic (DTR)

Henviste dokumenter