ar4910p7280tb

Remove / install exhaust system as from flange connection

Type ar · emne 49.10 · version 0106 · 2010-03-16

Gælder for: ENGINE 112.913 in MODELS 211.061 /261 ENGINE 112.949 in MODELS 211.065 /265 ENGINE 113.967 in MODELS 211.070 /270 ENGINE 112.917 in MODELS 211.080 /280 ENGINE 112.954 in MODELS 211.082 /282 ENGINE 113.969 in MODELS 211.083 /283

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 49 Udstødningssystem, udstødningsrensning › 49.10 Udstødningsrør, katalysator, lyddæmper — Serie 211 (modeller 061, 065, 070, 080, 082, 083, 261, 265, 270, 280, 282, 283)

EinPAS 15 Motor › 15.40 Udstødningssystem/udstødningsefterbehandling › 15.40.41 manifold/rør/lyddæmper/udstødningsslange — Serie 211 (modeller 061, 065, 070, 080, 082, 083, 261, 265, 270, 280, 282, 283)

Gælder også for motorer/gearkasser: 112 913, 112 917, 112 949, 112 954, 113 967, 113 969

AR49.10-P-7280TB

Remove / install exhaust system as from flange connection

11.3.10

ENGINE 112.913 in MODELS 211.061 /261

ENGINE 112.949 in MODELS 211.065 /265

ENGINE 113.967 in MODELS 211.070 /270

ENGINE 112.917 in MODELS 211.080 /280

ENGINE 112.954 in MODELS 211.082 /282

ENGINE 113.969 in MODELS 211.083 /283

Remove / install exhaust system as from flange connection

P49.10-2202-09

9a Left rear muffler

9b Right rear muffler

9/1 Exhaust rubber mount

9/2 Exhaust rubber mount

21b Sealing ring

158/1 Catalytic converter

158/2 Catalytic converter

10 Center muffler

12a Flange connection

12b Flange connection

21a Sealing ring

Remove/install

Danger!

Risk of death caused by vehicle slipping or toppling off the lifting platform.

Align vehicle between the columns of the and position the four support plates below the lifting platform support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

Danger!

Risk of injury to skin and eyes caused by handling hot or glowing objects.

Wear safety gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

Notes on self-locking nuts and bolts

All models

AH00.00-N-0001-01A

1

Raise vehicle.

2

Disconnect left and the right flange connection (12a, 12b) of the center muffler (10) at the three way catalytic converters (158/1, 158/2)

Installation: First tighten left flange connection (12a).

Self-locking Nut,, rear muffler flange connection to three way catalytic converter

*BA49.10-P-1014-01A

3

Unhook left rear muffler (9a) and right rear muffler (9b) from exhaust rubber mount (9/1, 9/2)

Use lubricant

Installation: Check exhaust rubber mounts (9/1, 9/2), replace if worn.

Lubricant

*BR00.45-Z-1002-06A

4

Lift out exhaust system

Tilt exhaust system by approximately 45° about the longitudinal axis.

Checking

5

Check exhaust rubber mount (9/1, 9/2) and sealing ring (21a, 21b) for wear and damage

6

Install in the reverse order

Checking

7

Inspect installation position and clearance of exhaust system

The exhaust system must be installed free of stress, if necessary:

Align exhaust system.

Danger!

Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the running engine

Secure vehicle to prevent it from moving by itself.
Wear closed and snug-fitting work clothes.
Do not grasp hot or rotating parts.

AS00.00-Z-0005-01A

8

Conduct engine test run and inspect exhaust system for leaks

Exhaust system

Number

Designation

Engines
112, 113
in model
211

BA49.10-P-1014-01A

Self-locking nut, rear muffler flange connection to three way catalytic converter

Nm

20

Repair materials

Number

Designation

Order number

BR00.45-Z-1002-06A

Lubricating paste, rubber parts 2.5 kg, DB supply specification 6867.00

A 000 989 01 60

Henviste dokumenter