Remove/install right catalytic converter · ar4910p5503lf · Mercedes-Benz WIS

AR49.10-P-5503LF

Remove/install right catalytic converter

14.03.2018

Engine	157, 276.8, 278, 279 in model 217
Engine	157, 276.8/9, 277, 278, 279 in model 222

Remove/install right catalytic converter

P49.10-3227-09

Shown on model 222 exhaust system with 276.8 engine with code 472 (gasoline particulate filter)

2	Left catalytic converter	12	Clip	31	Elastomer bearing
3	Right catalytic converter	13	Clip	55	Nuts
10	Bolts	22	Bracket

P49.10-3035-09

Shown on exhaust system for model 222 with engine 157

2	Left catalytic converter	11	Clip	22	Bracket
3	Right catalytic converter	12	Clip
10	Bolts	13	Clip

Shown on exhaust system with 278 engine from production date 2016-7-1

2	Left catalytic converter
3	Right catalytic converter
14	Bolts
15	Bolts
23	Bracket

P49.10-3166-11

Shown on the exhaust system with engine 279

2	Left catalytic converter
3	Right catalytic converter
16	Bolts
17	Clamps

P49.10-3167-05

 Warning	Risk of burn injuries, suffocation and poisoning when working on the exhaust system and the components connected to it. Risk of suffocation and risk of poisoning caused by inhalation of gaseous and solid components of the exhaust. Risk of poisoning caused by skin contact with solid components of the exhaust.	Wear protective clothing and safety glasses. Use the extraction system. Move people out of the hazard area.	AS49.00-Z-0001-01A
 Danger	Risk of death caused by vehicle slipping or toppling off of the lifting platform.	Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.	AS00.00-Z-0010-01A
 Caution	Risk of injury caused by scraping or cutting body parts on sharp vehicle parts	Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. Deburr repair panels.	AS00.00-Z-0017-01A
Topical note	Notes on threaded connections fastened using a tightening angle-based tightening process		AH00.00-P-0020-01A
Topical note	Notes on avoiding damage through contamination and foreign objects		AH00.00-P-5000-01A
Topical note	Notes on self-locking nuts and bolts		AH00.00-N-0001-01A
	Remove
1	Remove rear center and middle lower engine compartment paneling	Engine 157, 276.8/9, 277, 278, 279 in model 222 with code Z07 (Top protection)	AR61.40-P-1001LFS
		Engine 157, 276.8, 278, 279 in model 217 Engine 157, 276.8/9, 277, 278, 279 in model 222 except code Z07 (Top protection)	AR61.20-P-1105LF
2	Release electrical connection for left oxygen sensor upstream of left catalytic converter (2), disconnect and unclip electrical line	Engine 276.8 in model 217 Engine 276.8 in model 222 except code 472 (Gasoline particulate filter)	AR07.04-P-0081LFA
		Engine 157 in model 222 Engine 157, 278 in model 217 Engine 278 in model 222 except code 472 (Gasoline particulate filter)	AR07.04-P-0081LFB
		Engine 277, 279 in model 222 Engine 279 in model 217	AR07.04-P-0081MUB
3	Release electrical connection for left oxygen sensor upstream of left catalytic converter (2), disconnect and unclip electrical line	Engine 276.8 in model 217 Engine 276.8 in model 222 except code 472 (Gasoline particulate filter)	AR07.04-P-0082LFA
		Engine 157 in model 222 Engine 157, 278 in model 217 Engine 278 in model 222 except code 472 (Gasoline particulate filter)	AR07.04-P-0082LFB
		Engine 277, 279 in model 222 Engine 279 in model 217	AR07.04-P-0082MUB
4	Release electrical connection for right oxygen sensor upstream of right catalytic converter (3), disconnect and unclip electrical line	Engine 276.9 in model 222	AR07.52-P-5303LFH
		Engine 276.8 in model 217, 222	AR07.04-P-0083LFA
		Engine 157, 278 in model 217, 222	AR07.04-P-0083LFB
		Engine 277, 279 in model 222 Engine 279 in model 217	AR07.04-P-0083MUB
5	Release electrical connection for right oxygen sensor downstream of right catalytic converter (3), disconnect and unclip electrical line	Engine 276.9 in model 222	AR07.52-P-5303LFH
		Engine 276.8 in model 217, 222	AR07.04-P-0084LFA
		Engine 157, 278 in model 217, 222	AR07.04-P-0084LFB
		Engine 277, 279 in model 222 Engine 279 in model 217	AR07.04-P-0084MUB
6.1	Support left catalytic converter (2) and right catalytic converter (3) and secure against falling down	Engine 157, 276, 278, 279 in model 217 Engine 157, 277, 279 in model 222 Engine 276.8 in model 222 except code 472 (Gasoline particulate filter) Engine 278 in model 222 except code 472 (Gasoline particulate filter)
		 Aid of helper required.
6.2	Support the right-hand catalytic converter (3) and secure it against falling down	Engine 276.8 in model 222 with code 472 (Gasoline particulate filter) Engine 276.9 in model 222 Engine 278 in model 222 with code 472 (Gasoline particulate filter)
		 Aid of helper required.
7	Remove the elastomer bearing (31) on the right-hand catalytic converter (3)	Engine 276.8 in model 222 with code 472 (Gasoline particulate filter) Engine 276.9 in model 222 Engine 278 in model 222 with code 472 (Gasoline particulate filter)
8.1	Unscrew the screws (14) of the left-hand catalytic converter (2) and the right-hand catalytic converter (3)	Engine 157, 276.8, 278, 279 in model 217 Engine 157, 277, 279 in model 222 Engine 276.8 in model 222 except code 472 (Gasoline particulate filter) Engine 278 in model 222 except code 472 (Gasoline particulate filter)
8.2	Unscrew the screws (14) of the right-hand catalytic converter (3)	Engine 276.8 in model 222 with code 472 (Gasoline particulate filter) Engine 276.9 in model 222 Engine 278 in model 222 with code 472 (Gasoline particulate filter)
9.1	Loosen the screw (15) of the left-hand catalytic converter (2) and screws (15) of the right-hand catalytic converter (3)	Engine 278 in model 217 as of 7/1/16 Engine 278 in model 222 as of 7/1/16 except code 472 (Gasoline particulate filter)
9.2	Loosen the screws (15) of the left-hand catalytic converter (2) and the screws on the right-hand catalytic converter (3)	Engine 157, 276.8, 279 in model 217 Engine 157, 277, 279 in model 222 Engine 276.8 in model 222 except code 472 (Gasoline particulate filter) Engine 278 in model 217 up to 6/30/16, 222 up to 6/30/16
9.3	Loosen the screws (15) of the right-hand catalytic converter (3)	Engine 276.8 in model 222 with code 472 (Gasoline particulate filter) Engine 276.9 in model 222 Engine 278 in model 222 with code 472 (Gasoline particulate filter)
10.1	Unscrew the screws (10) of the left-hand catalytic converter (2) and the screws of the right-hand catalytic converter (3)	Engine 157 in model 222 Engine 157, 276.8, 278 in model 217 Engine 276.8 in model 222 except code 472 (Gasoline particulate filter) Engine 278 in model 222 except code 472 (Gasoline particulate filter)
10.2	Remove screws/bolts (16) and remove clamps (17)	Engine 277, 279 in model 222 Engine 279 in model 217
10.3	Unscrew the screws (10) of the right-hand catalytic converter (3)	Engine 276.8 in model 222 with code 472 (Gasoline particulate filter) Engine 276.9 in model 222 Engine 278 in model 222 with code 472 (Gasoline particulate filter)
11.1	Loosen clamps (12, 13) and push back	Engine 157, 276.8, 278, 279 in model 217 Engine 157, 277, 279 in model 222 Engine 276.8 in model 222 except code 472 (Gasoline particulate filter) Engine 278 in model 222 except code 472 (Gasoline particulate filter)
11.2	Loosen the clamp (12) and push it back	Engine 276.8 in model 222 with code 472 (Gasoline particulate filter) Engine 276.9 in model 222 Engine 278 in model 222 with code 472 (Gasoline particulate filter)
12	Unscrew the nuts (55) of the fastening plate, remove the fastening plate	Engine 276.8 in model 222 with code 472 (Gasoline particulate filter) Engine 276.9 in model 222 Engine 278 in model 222 with code 472 (Gasoline particulate filter)
13.1	Remove the left-hand catalytic converter (2) and right-hand catalytic converter (3) from the bracket (22) towards the bottom	Engine 157, 276.8, 278, 279 in model 217 Engine 157, 277, 279 in model 222 Engine 276.8 in model 222 except code 472 (Gasoline particulate filter) Engine 278 in model 222 except code 472 (Gasoline particulate filter)
		 Aid of helper required.
13.2	Remove the right-hand catalytic converter (3) from the bracket (22) towards the bottom	Engine 276.8 in model 222 with code 472 (Gasoline particulate filter) Engine 276.9 in model 222 Engine 278 in model 222 with code 472 (Gasoline particulate filter)
		 Aid of helper required.
14	Unfasten clamp (11) and push back	Engine 157, 277, 279 in model 222 Engine 157, 279 in model 217 When replacing the right catalytic converter (3).
15	Disconnect right CAT (2) from left CAT (3)	Engine 157, 277, 279 in model 222 Engine 157, 279 in model 217 When replacing the right catalytic converter (3).
16	Remove the gasket of the separation point at the clamp (12) after the right-hand catalytic converter (3) at the rear exhaust system	Engine 157, 276.8, 278, 279 in model 217 Engine 276.8 in model 222 with code 472 (Gasoline particulate filter) Engine 276.9 in model 222 Engine 278 in model 222 with code 472 (Gasoline particulate filter)
	Install
17	Check elastomer bearings of bracket (22) for damage	If damage is present
		
		Replace bracket (22).
		 Engine 157, 276.8, 278, 279 in model 217Screw/bolt, bracket for elastomer bearing for front exhaust system to rear engine support	*BA49.10-P-1005-02D
		 Engine 157, 276.8/9, 277, 278, 279 in model 222Bolt, bracket for elastomer bearing for front exhaust system to rear engine support	*BA49.10-P-1005-01AN
18	Check the elastomer bearing (31) for damage	Engine 276.8 in model 222 with code 472 (Gasoline particulate filter) Engine 276.9 in model 222 Engine 278 in model 222 with code 472 (Gasoline particulate filter)
		If damage is present
		
		Replace the elastomer bearing (31).
19	Remove combustion and corrosion residue at the connections
20	Replace the gasket of the separation point at the clamp (12) after the right-hand catalytic converter (3) at the rear exhaust system	Engine 157, 276.8, 278, 279 in model 217 Engine 276.8 in model 222 with code 472 (Gasoline particulate filter) Engine 276.9 in model 222 Engine 278 in model 222 with code 472 (Gasoline particulate filter)
21	Mount right CAT (2) on left CAT (3)	Engine 157, 277, 279 in model 222 Engine 157, 279 in model 217 When replacing the right catalytic converter (3).
22.1	Modify bracket (23) of right catalytic converter (3)	Engine 157, 277, 279 in model 222 Engine 157, 279 in model 217 Engine 276.8 in model 222 with code 472 (Gasoline particulate filter) Engine 276.9 in model 222 Engine 278 in model 222 with code 472 (Gasoline particulate filter) When replacing the right catalytic converter (3).
22.2	Convert the brackets (23, 24) of the left-hand catalytic converter (2) and right-hand catalytic converter (3)	Engine 276.8 in model 222 except code 472 (Gasoline particulate filter) Engine 278 in model 217 Engine 278 in model 222 except code 472 (Gasoline particulate filter) When replacing the right catalytic converter (3).
23	Position clamp (11) and tighten screw/bolt of the clamp (11) on the right CAT (3) slightly by hand	Engine 157, 277, 279 in model 222 Engine 157, 279 in model 217 When replacing the right catalytic converter (3).
24.1	Install and support the right-hand catalytic converter (3) and left-hand catalytic converter (2) on the bracket (22)	Engine 157, 276.8, 278, 279 in model 217 Engine 157, 277, 279 in model 222 Engine 276.8 in model 222 except code 472 (Gasoline particulate filter) Engine 278 in model 222 except code 472 (Gasoline particulate filter)
		 Aid of helper required.
		Lubricant, rubber assembly 1 l	*BR00.45-Z-1010-06A
24.2	Install and support the right-hand catalytic converter (3) to the bracket (22)	Engine 276.8 in model 222 with code 472 (Gasoline particulate filter) Engine 276.9 in model 222 Engine 278 in model 222 with code 472 (Gasoline particulate filter)
		 Aid of helper required.
		Lubricant, rubber assembly 1 l	*BR00.45-Z-1010-06A
25	Install the elastomer bearing (31) on the right-hand catalytic converter (3)	Engine 276.8 in model 222 with code 472 (Gasoline particulate filter) Engine 276.9 in model 222 Engine 278 in model 222 with code 472 (Gasoline particulate filter)
		Lubricant, rubber assembly 1 l	*BR00.45-Z-1010-06A
26	Lightly tighten screw/bolts (14) by hand
27	Lightly tighten screw/bolts (15) by hand
28.1	Position clamps (12, 13) and tighten screw/bolts of clamps (12, 13) slightly by hand	Engine 157, 276.8, 278, 279 in model 217 Engine 157, 277, 279 in model 222 Engine 276.8 in model 222 except code 472 (Gasoline particulate filter) Engine 278 in model 222 except code 472 (Gasoline particulate filter)
28.2	Position the clamp (12) and slightly tighten the screws on the clamp (12) by hand	Engine 276.8 in model 222 with code 472 (Gasoline particulate filter) Engine 276.9 in model 222 Engine 278 in model 222 with code 472 (Gasoline particulate filter)
29.1	Slightly tighten screw/bolts (10) by hand	Engine 157, 276.8, 278 in model 217 Engine 157, 276.8/9, 278 in model 222
29.2	Position clamps (17) and tighten screw/bolts (16) slightly by hand	Engine 277, 279 in model 222 Engine 279 in model 217
30	Position the fastening plate and nuts (55) and slightly tighten by hand	Engine 276.8 in model 222 with code 472 (Gasoline particulate filter) Engine 276.9 in model 222 Engine 278 in model 222 with code 472 (Gasoline particulate filter)
31	Check installation position and unobstructed movement of exhaust system, align if required
32.1	Tighten screw/bolts (10)	Engine 157, 276.8, 278 in model 217 Engine 157, 276.8/9, 278 in model 222
		 Engine 157, 276.8/9, 278 in model 222Bolt, front exhaust system to exhaust line	*BA49.10-P-1001-01AN
		 Engine 157, 276.8, 278 in model 217Bolt, front exhaust system to exhaust line	*BA49.10-P-1001-02D
32.2	Fully tighten screw/bolts (16)	Engine 277, 279 in model 222 Engine 279 in model 217
		 Engine 277 in model 222 Engine 279 in model 222Clamp, front exhaust system to turbocharger	*BA49.10-P-1023-01AN
		 Engine 279 in model 217Screw/bolt, front exhaust system clamp to turbocharger	*BA49.10-P-1013-02D
33	Fully tighten screw/bolts (14)	 Engine 157 in model 217 Engine 276 in model 217 Engine 278 in model 217Bolt, front exhaust system bracket to transmission	*BA49.10-P-1003-02D
		 Engine 279 in model 217Screw/bolt, front exhaust system bracket to transmission and crankcase	*BA49.10-P-1012-02D
		 Engine 157 in model 222 Engine 276 in model 222 Engine 278 in model 222Bolt, front exhaust system bracket to transmission	*BA49.10-P-1003-01AN
		 Engine 277 in model 222 Engine 279 in model 222Bolt, front exhaust system bracket to transmission and crankcase	*BA49.10-P-1022-01AN
34.1	Tighten the screws (15) of the left-hand catalytic converter (2) and the screws of the right-hand catalytic converter (3)	Engine 157, 276.8, 279 in model 217 Engine 157, 277, 279 in model 222 Engine 276.8 in model 222 except code 472 (Gasoline particulate filter) Engine 278 in model 217 up to 6/30/16 Engine 278 in model 222 up to 6/30/16 except code 472 (Gasoline particulate filter)
		 Engine 157, 276.8, 279 in model 217 Engine 278 in model 217 up to 6/30/16Bolt to front exhaust system bracket	*BA49.10-P-1002-02D
		 Engine 157, 277, 279 in model 222 Engine 276.8 in model 222 except code 472 (Gasoline particulate filter) Engine 278 in model 222 up to 6/30/16 except code 472 (Gasoline particulate filter)Bolt to front exhaust system bracket	*BA49.10-P-1002-01AN
34.2	Tighten the screws (15) of the right-hand catalytic converter (3)	Engine 276.8 in model 222 with code 472 (Gasoline particulate filter) Engine 276.9 in model 222 Engine 278 in model 222 with code 472 (Gasoline particulate filter)
		 Engine 276.8 in model 222 with code 472 (Gasoline particulate filter) Engine 276.9 in model 222 Engine 278 in model 222 with code 472 (Gasoline particulate filter)Bolt to front exhaust system bracket	*BA49.10-P-1002-01AN
34.3	Tighten the screw (15) of the left-hand catalytic converter (2) and the screws (15) of the right-hand catalytic converter (3)	Engine 278 in model 217 as of 7/1/16 Engine 278 in model 222 as of 7/1/16 except code 472 (Gasoline particulate filter)
		 Engine 278 in model 217 as of 7/1/16Bolt to front exhaust system bracket	*BA49.10-P-1002-02D
		 Engine 278 in model 222 as of 7/1/16 except code 472 (Gasoline particulate filter)Bolt to front exhaust system bracket	*BA49.10-P-1002-01AN
35.1	Tighten the clamp (12)	Engine 276.8 in model 222 with code 472 (Gasoline particulate filter) Engine 276.9 in model 222 Engine 278 in model 222 with code 472 (Gasoline particulate filter)
		 Engine 276.8 in model 222 with code 472 (Gasoline particulate filter) Engine 276.9 in model 222 Engine 278 in model 222 with code 472 (Gasoline particulate filter)Bolt, clamp for front/center/rear exhaust system	*BA49.10-P-1006-01AN
35.2	Tighten the clamps (12, 13)	Engine 157, 276.8, 278, 279 in model 217 Engine 157, 277, 279 in model 222 Engine 276.8 in model 222 except code 472 (Gasoline particulate filter) Engine 278 in model 222 except code 472 (Gasoline particulate filter)
		 Engine 157 in model 222 Engine 276.8 in model 222 except code 472 (Gasoline particulate filter) Engine 277 in model 222 Engine 278 in model 222 except code 472 (Gasoline particulate filter) Engine 279 in model 222Bolt, clamp for front/center/rear exhaust system	*BA49.10-P-1006-01AN
		 Engine 157 in model 217 Engine 276.8 in model 217 Engine 278 in model 217 Engine 279 in model 217Bolt, clamp for front/center/rear exhaust system	*BA49.10-P-1006-02D
36	Tighten the clamp (11)	Engine 157, 277, 279 in model 222 Engine 157, 279 in model 217 When replacing the right catalytic converter (3).
		 Engine 157, 277, 279 in model 222Bolt, clamp for front/center/rear exhaust system	*BA49.10-P-1006-01AN
		 Engine 157, 279 in model 217Bolt, clamp for front/center/rear exhaust system	*BA49.10-P-1006-02D
37	Tighten the nuts (55)	Engine 276.8 in model 222 with code 472 (Gasoline particulate filter) Engine 276.9 in model 222 Engine 278 in model 222 with code 472 (Gasoline particulate filter)
		 Nut to mounting plate	*BA49.10-P-1025-01AN
38	Route electrical line of the left oxygen sensor upstream of left CAT (2); assemble and lock electrical connection	Engine 276.8 in model 217 Engine 276.8 in model 222 except code 472 (Gasoline particulate filter)	AR07.04-P-0081LFA
		Engine 157 in model 222 Engine 157, 278 in model 217 Engine 278 in model 222 except code 472 (Gasoline particulate filter)	AR07.04-P-0081LFB
		Engine 277, 279 in model 222 Engine 279 in model 217	AR07.04-P-0081MUB
39	Route electrical line of the left oxygen sensor upstream of left CAT (2); assemble and lock electrical connection	Engine 276.8 in model 217 Engine 276.8 in model 222 except code 472 (Gasoline particulate filter)	AR07.04-P-0082LFA
		Engine 157 in model 222 Engine 157, 278 in model 217 Engine 278 in model 222 except code 472 (Gasoline particulate filter)	AR07.04-P-0082LFB
		Engine 277, 279 in model 222 Engine 279 in model 217	AR07.04-P-0082MUB
40	Route electrical line of the right oxygen sensor upstream of right CAT (3); assemble and lock electrical connection	Engine 276.9 in model 222	AR07.52-P-5303LFH
		Engine 276.8 in model 217, 222	AR07.04-P-0083LFA
		Engine 157, 278 in model 217, 222	AR07.04-P-0083LFB
		Engine 277, 279 in model 222 Engine 279 in model 217	AR07.04-P-0083MUB
41	Route electrical line of the right oxygen sensor upstream of right CAT (3); assemble and lock electrical connection	Engine 276.9 in model 222	AR07.52-P-5303LFH
		Engine 276.8 in model 217, 222	AR07.04-P-0084LFA
		Engine 157, 278 in model 217, 222	AR07.04-P-0084LFB
		Engine 277, 279 in model 222 Engine 279 in model 217	AR07.04-P-0084MUB
 Warning	Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.	Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.	AS00.00-Z-0005-01A
42	Perform an engine test run; check engine for functionality and exhaust system for leaktightness
43	Install lower rear and center engine compartment paneling	Engine 157, 276.8/9, 277, 278, 279 in model 222 with code Z07 (Top protection)	AR61.40-P-1001LFS
		Engine 157, 276.8, 278, 279 in model 217 Engine 157, 276.8/9, 277, 278, 279 in model 222 except code Z07 (Top protection)	AR61.20-P-1105LF

 Exhaust system

Number	Designation		Engine 157 in model 222	Engine 276 in model 222
BA49.10-P-1001-01AN	Bolt, front exhaust system to exhaust line	Nm	20	20

 Exhaust system

Number	Designation		Engine 278 in model 222
BA49.10-P-1001-01AN	Bolt, front exhaust system to exhaust line	Nm	20

 Exhaust system

Number	Designation		Engine 157 in model 217	Engine 276 in model 217
BA49.10-P-1001-02D	Bolt, front exhaust system to exhaust line	Nm	20	20

 Exhaust system

Number	Designation		Engine 278 in model 217
BA49.10-P-1001-02D	Bolt, front exhaust system to exhaust line	Nm	20

 Exhaust system

Number	Designation		Engine 157 in model 222	Engine 276 in model 222
BA49.10-P-1002-01AN	Bolt to front exhaust system bracket	Nm	20	20

 Exhaust system

Number	Designation		Engine 277 in model 222	Engine 278 in model 222
BA49.10-P-1002-01AN	Bolt to front exhaust system bracket	Nm	20	20

 Exhaust system

Number	Designation		Engine 279 in model 222
BA49.10-P-1002-01AN	Bolt to front exhaust system bracket	Nm	20

 Exhaust system

Number	Designation		Engine 157 in model 217	Engine 276 in model 217
BA49.10-P-1002-02D	Bolt to front exhaust system bracket	Nm	20	20

 Exhaust system

Number	Designation		Engine 278 in model 217	Engine 279 in model 217
BA49.10-P-1002-02D	Bolt to front exhaust system bracket	Nm	20	20

 Exhaust system

Number	Designation			Engine 157 in model 222	Engine 276 in model 222
BA49.10-P-1003-01AN	Bolt, front exhaust system bracket to transmission	Stage 1	Nm	20	20
		Stage 2	°	-	-

 Exhaust system

Number	Designation			Engine 278 in model 222
BA49.10-P-1003-01AN	Bolt, front exhaust system bracket to transmission	Stage 1	Nm	20
		Stage 2	°	-

 Exhaust system

Number	Designation			Engine 157 in model 217	Engine 276 in model 217
BA49.10-P-1003-02D	Bolt, front exhaust system bracket to transmission	Stage 1	Nm	20	20
		Stage 2	°	-	-

 Exhaust system

Number	Designation			Engine 278 in model 217
BA49.10-P-1003-02D	Bolt, front exhaust system bracket to transmission	Stage 1	Nm	20
		Stage 2	°	-

 Exhaust system

Number	Designation		Engine 157 in model 222	Engine 276 in model 222
BA49.10-P-1005-01AN	Bolt, bracket for elastomer bearing for front exhaust system to rear engine support	Nm	20	20

 Exhaust system

Number	Designation		Engine 277 in model 222	Engine 278 in model 222
BA49.10-P-1005-01AN	Bolt, bracket for elastomer bearing for front exhaust system to rear engine support	Nm	20	20

 Exhaust system

Number	Designation		Engine 279 in model 222
BA49.10-P-1005-01AN	Bolt, bracket for elastomer bearing for front exhaust system to rear engine support	Nm	20

 Exhaust system

Number	Designation		Engine 157 in model 217	Engine 276 in model 217
BA49.10-P-1005-02D	Screw/bolt, bracket for elastomer bearing for front exhaust system to rear engine support	Nm	20	20

 Exhaust system

Number	Designation		Engine 278 in model 217	Engine 279 in model 217
BA49.10-P-1005-02D	Screw/bolt, bracket for elastomer bearing for front exhaust system to rear engine support	Nm	20	20

 Exhaust system

Number	Designation			Engine 157 in model 222	Engine 276 in model 222
BA49.10-P-1006-01AN	Bolt, clamp for front/center/rear exhaust system	M8	Nm	35	35

 Exhaust system

Number	Designation			Engine 277 in model 222	Engine 278 in model 222
BA49.10-P-1006-01AN	Bolt, clamp for front/center/rear exhaust system	M8	Nm	35	35

 Exhaust system

Number	Designation			Engine 279 in model 222
BA49.10-P-1006-01AN	Bolt, clamp for front/center/rear exhaust system	M8	Nm	35

 Exhaust system

Number	Designation		Engine 157 in model 217	Engine 276 in model 217
BA49.10-P-1006-02D	Bolt, clamp for front/center/rear exhaust system	Nm	35	35

 Exhaust system

Number	Designation		Engine 278 in model 217	Engine 279 in model 217
BA49.10-P-1006-02D	Bolt, clamp for front/center/rear exhaust system	Nm	35	35

 Exhaust system

Number	Designation		Engine 279 in model 217
BA49.10-P-1012-02D	Screw/bolt, front exhaust system bracket to transmission and crankcase	Nm	38

 Exhaust system

Number	Designation		Engine 279 in model 217
BA49.10-P-1013-02D	Screw/bolt, front exhaust system clamp to turbocharger	Nm	23

 Exhaust system

Number	Designation		Engine 277 in model 222	Engine 279 in model 222
BA49.10-P-1022-01AN	Bolt, front exhaust system bracket to transmission and crankcase	Nm	38	38

 Exhaust system

Number	Designation		Engine 277 in model 222	Engine 279 in model 222
BA49.10-P-1023-01AN	Clamp, front exhaust system to turbocharger	Nm	23	23

 Exhaust system

Number	Designation		Engine 276 in model 222	Engine 278 in model 222
BA49.10-P-1025-01AN	Nut to mounting plate	Nm	20	20

Repair materials

Number	Designation	Order number
BR00.45-Z-1010-06A	Lubricant, rubber assembly 1 l	A 000 989 03 67

Henviste dokumenter

ah0000n000101a Oplysninger om selvlåsende bolte og møtrikker
ah0000p002001a Oplysninger om skrueforbindelser, som er fremstillet efter den drejevinkelstyrede tilspændingsmetode
ah0000p500001a Oplysninger om forebyggelse af skader på grund af snavs og fremmedlegemer
ar0704p0081lfa
ar0704p0081lfb
ar0704p0081mub
ar0704p0082lfa
ar0704p0082lfb
ar0704p0082mub
ar0704p0083lfa
ar0704p0083lfb
ar0704p0083mub
ar0704p0084lfa
ar0704p0084lfb
ar0704p0084mub
ar0752p5303lfh
ar6120p1105lf
ar6140p1001lfs
as0000z000501a Fare for ulykke ved automatisk igangsætning når motoren kører. Fare for personskade på grund af knusning og forbrænding, hvis der arbejdes mens motoren startes eller kører
as0000z001001a Livsfare, hvis køretøjet glider ned fra eller tipper på liften.
as0000z001701a Fare for personskade på grund af snitsår eller hudafskrabninger grundet skarpkantede køretøjsdele
as4900z000101a Forbrændings-, kvælnings- og forgiftningsfare ved arbejde på udstødningssystemet og dermed forbundne komponenter. Kvælningsfare og fare for forgiftning ved indånding af gasformede og faste komponenter i forbrændingsgassen. Fare for