1 | Drain plugs |
2 | Cover |
3 | Seal |
4 | Screw |
T43.30-0025-11
Danger ! | Risk of injury caused by touching hot retarder and by scalding from hot retarderoil. Risk of injury to skin or eyes caused by retarder oil escaping under high pressure | Do not carry out any work unless retarder is switched off. Wear suitable protective clothing and safety glasses when working on the hot retarder. | |
| Remove | ||
1 | Have a suitable receptacle for oil ready to hand, remove drain screws (1) and drain off oil completely | ||
| |||
2 | Remove screws (4) | ||
3 | Detach cover (2) together with seal (3) | ||
| Clean | ||
4 | Clean contact surfaces of seal (3) | ||
| Install | ||
5 | Attach cover (2) together with new seal (3) | Ensure the correct installation position of the seal (3) relative to the cover (2). | |
6 | Tighten screws (4) | ||
Observe the tightening sequence. | |||
Bolt, oil reservoir cover at bottom to oil reservoir | |||
7 | Tighten drain screws (1) and pour in oil | ||
|
Henviste dokumenter
- ap4330g4302oha Olieskift hydrodynamisk retarder udføres
- ar4330g006801oha
- as4330z000101a Fare for personskade på grund af kontakt med den varme retarder og skoldning medvarm retarderolie Fare for personskade på hud og øjne på grund af retarderolie, der sprøjter ud under højt tryk.