1 | Retarder |
2 | Silencer |
3 | Proportional valve |
4 | Upper cap |
5 | Air inlet and outlet valve |
6 | Proportional valve pressure sensor |
7 | Intake check valve |
8 | Pressure sensor |
B43.30-A003-12
1 | Retarder |
9 | Oil temperature sensor |
10 | Coolant temperature sensor |
B43.30-A002-12
| Disassemble/assemble | ||
Warning | Risk of injury caused by touching hot retarder and by scalding from hot retarderoil. Risk of injury to skin or eyes caused by retarder oil escaping under high pressure | Do not carry out any work unless retarder is switched off. Wear suitable protective clothing and safety glasses when working on the hot retarder. | |
1 | Remove the retarder (1) | ||
The retarder (1) must be transported and stored as determined by the manufacturer. | |||
2 | Remove the silencer (2) | ||
3 | Remove the proportional valve (3) | ||
4 | Remove the upper cover (4) | ||
5 | Remove air inlet and outlet valve (5) | ||
6 | Remove the coolant temperature sensor | ||
7 | Remove oil temperature sensor (9) | ||
8 | Remove the pressure sensor (8) | Air pressure sensor | |
9 | Remove the intake check valve (7) | ||
10 | Assemble in reverse order | ||
| Check | ||
11 | Check the components for wear and, if necessary, replace them |
Henviste dokumenter
- ar4330b0001d
- ar4330b0002b
- ar4330b0003d
- ar4330b0005d
- ar4330b0008b
- ar4330b0012d
- ar4330b0019a
- ar4330b0020a
- as4330z000101a Fare for personskade på grund af kontakt med den varme retarder og skoldning medvarm retarderolie Fare for personskade på hud og øjne på grund af retarderolie, der sprøjter ud under højt tryk.