AR40.30-D-0402D | Carry out distance and comparison measurements on front and rear axles | 4.5.98 |
MODELS 904.06 /36 /46 /66
D40.30-0004-05
Frame measuring data
V1 Distance (diagonal) from check bore "k1" in frame side member to check bore "k2" in opposite frame side member.
V2 Distance (diagonal) from check bore "K" in measuring bridge to check bore "k1" in frame side member.
V3 Distance from check bore "k1" in frame longitudinal member to check bore "k2" in the same frame longitudinal member.
H1 Distance (diagonal) from check bore "K" in measuring bridge to check bore "k3" in frame side member.
H2 Distance (diagonal) from check bore "k3" in side rail to check bore "k4" in side rail.
H3 Distance from check bore "k3" in slide rail to check bore "k4" in the same side rail.
BR1 Distance of check bores "k1" from left to right side rail.
BR2 Distance of check bores "k2" and "k4" from left to right side rail.
BR3 Distance of check bore "k4" from left to right side rail.
Fig. item, etc. | Work instructions | ||
| Frame measuring data for accident measurement | Test values for rear axle distance and comparison measurement | |
Test values for distance and comparison measurement on front axle | |||
Inspection data of frame | |||
Inspection data of frame height offset Frame height offset measured diagonally across frame using e.g. spirit level (length approx. 1 m). Requirement: The vehicle must be on the scale | |||
| Beam trammel | ||
| Measuring tips | ||
| Measuring cone | ||
| Measuring arm |
Test values for rear axle distance and comparison measurement
Number | Designation | models 904.062/362/462/662 | models 904.063/363/463/663 | |||
BE40.30-N-1001-05B | Test value | H1 | effective dimension | mm | - | - |
max. difference | mm | 4 | 4 | |||
H2 | effective dimension | mm | - | - | ||
max. difference | mm | 4 | 4 | |||
H3 | effective dimension | mm | 1880 2 | 2830 2 | ||
max. difference | mm | 3 | 3 | |||
Fig. see | ||||||
Test values for distance and comparison measurement on front axle
Number | Designation | Models | |||
BE40.30-N-1001-06B | Test value | V1 | effective dimension | mm | - |
max. difference | mm | 4 | |||
V2 | effective dimension | mm | - | ||
max. difference | mm | 4 | |||
V3 | effective dimension | mm | 1461 2 | ||
max. difference | mm | 3 | |||
Fig. see | |||||
Inspection data of frame
Number | Designation | Models 904.06/36/46/66 | |||
BE40.30-N-1001-09B | Measured value for frame width | BR1 | effective dimension | mm | 860 2 |
distance of frame longitudinal member insides to each other | 800 3 | ||||
BR2 | effective dimension | mm | 980 3 | ||
distance of frame longitudinal member insides to each other | 920 3 | ||||
BR3 | effective dimension | mm | 768 3 | ||
distance of frame longitudinal member insides to each other | 708 3 | ||||
Fig. see | |||||
BE40.30-N-1002-09B | Permissible deviation in height parallelism of left side rail relative to right side rail | for frame width | mm | 768 | |
Deviation | ° | 0° 22' | |||
Height difference approx. | mm | 5 | |||
for frame width | mm | 860 | |||
Deviation | ° | 0°20' | |||
Height difference approx. | mm | 5 | |||
for frame width | mm | 980 | |||
Deviation | ° | 0° 18' | |||
Height difference approx. | mm | 5 | |||
Commercially available tools
Number | Designation | |
WH58.30-Z-1001-31A | Beam trammel | |
WH58.30-Z-1005-31A | Measuring tip with scale | |
WH58.30-Z-1006-31A | Measuring cone Firma Nestle & Fischer Vermessungsgeräte GmbH, D-72280 Dornstetten | |
WH58.30-Z-1007-31A | Contact arm with scale Firma Nestle & Fischer Vermessungsgeräte GmbH, D-72280 Dornstetten |