P20.40-2038-04
Shown on model 220
1 Fan shroud
2 Coolant line
3 Fastening shackle
4 Retaining lug
P20.40-2065-05
Shown on model 220
2 Coolant line
6 Bolts
7 Coolant line
P20.20-2235-10
8 ATF line
9 Radiator
| Remove/install | ||
1 | Remove engine trim panel | ||
2 | Remove left and right suction fan duct | ||
3 | Drain coolant at radiator (9) | ||
| Notes on coolant | All engines | |
4 | Unscrew bolts (6), coolant line (2) and coolant line (7) from coolant temperature control switch to radiator | ||
5 | Unscrew bolt from retaining tabs (3) on fan shroud (1) | ||
6 | Separate electric plug sockets at suction fan | ||
7 | Unscrew automatic oil line (8) | Before opening the automatic transmission or its components, the ambiance of the separation point has to be cleaned thoroughly. Even the smallest particles of dirt, introduced into the hydraulic components, can result in malfunctions and a total failure of the automatic transmission. Only remove at top right of radiator. Seal ATF lines so that no ATF flows out. | |
| |||
8 | Remove fastening shackles for engine oil line below at fan shroud (1) | ||
9 | Remove mounting clamps for fan shroud (1) at radiator (9) | ||
10 | Remove fan shroud (1) | Pull fan shroud (1) with retaining lugs (4) out of retaining tabs at radiator (9). | |
11 | Install in the reverse order | ||
12 | Adjust coolant to correct level | ||
13 | Bleed cooling system | ||
14 | Inspecting cooling system for leaks | ||
15 | Check oil level in automatic transmission, correct if necessary |
Radiator, coolant hoses
Henviste dokumenter
- ah2000n208001a Oplysninger om kølervæske
- ar0110p2405im
- ar2000p1010ha
- ar2000p1010ha
- ar2000p114206ga
- ar2000p1142h
- ar2700p0100ac Kontrol af oliestand i automatgearkasse og korrektion om nødvendigt