ar0110p2405im

Remove/install engine cover

Type ar · emne 01.10 · version 0104 · 2008-11-13

Gælder for: ENGINES 275.980 in MODEL 215.379, 220.179 ENGINES 275.981 /983 in MODEL 230.479 ENGINES 275.982 in MODEL 221.179, 216.379

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 01 Motor komplet, motorudluftning, topstykke, motorblok › 01.10 Motor komplet — Serie 215 (modeller 379) · Serie 216 (modeller 379) · Serie 220 (modeller 179) · Serie 221 (modeller 179) · Serie 230 (modeller 479)

EinPAS 15 Motor › 15.15 forbrændingsmotor komplet/motorblok/krumtapdrev › 15.15.45 afdækning/beklædning — Serie 215 (modeller 379) · Serie 216 (modeller 379) · Serie 220 (modeller 179) · Serie 221 (modeller 179) · Serie 230 (modeller 479)

Gælder også for motorer/gearkasser: 275 980, 275 981, 275 982, 275 983

AR01.10-P-2405IM

Remove/install engine cover

30.10.08

ENGINES 275.980 in MODEL 215.379, 220.179

ENGINES 275.981 /983 in MODEL 230.479

ENGINES 275.982 in MODEL 221.179, 216.379

Remove/install engine cover

P01.10-2496-06

1 Front engine trim panel

2 Rear engine cover

3 Mounting clamps

4 Guides

5 Mounting clamps

Remove/install

1

Remove the air intake pipe

2

Unclip mounting clamps (5, 2 pieces) for rear engine cover (2)

3

Pull out rear engine cover (2) from the guides (4) and remove it

Installation: Ensure that the rubbers in the guides (4) are positioned correctly.

4

Unclip mounting clip (3, 5 pieces)

While unclipping, lift carefully in the area of the respective mounting clamp (3) otherwise the front engine cover (1) can break.

Lift front engine cover (1) first to the front and then laterally a little to the right and to the left.

5

Remove front engine cover (1)

6

Install in the reverse order