ar2040p6800ab

Remove/install fan shroud

Type ar · emne 20.40 · version 0201 · 2006-02-06

Gælder for: ENGINES 112, 113 in MODEL 220 ENGINE 113 in MODEL 215 ENGINE 113.963 in MODEL 230.475 ENGINE 113.992 in MODEL 230.474 ENGINE 112.973 in MODEL 230.467 ENGINE 113.995 in MODEL 230.472

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 20 Motorkøling › 20.40 Ventilator, ventilatorkobling — Serie 215 · Serie 220 · Serie 230 (modeller 467, 472, 474, 475)

EinPAS 15 Motor › 15.25 Motorkølesystem › 15.25.45 ventilator/ventilatorkobling/ventilatordrev — Serie 215 · Serie 220 · Serie 230 (modeller 467, 472, 474, 475)

Gælder også for motorer/gearkasser: 112 ***, 112 973, 113 ***, 113 963, 113 992, 113 995

AR20.40-P-6800AB

Remove/install fan shroud

24.1.06

ENGINES 112, 113 in MODEL 220

ENGINE 113 in MODEL 215

ENGINE 113.963 in MODEL 230.475

ENGINE 113.992 in MODEL 230.474

ENGINE 112.973 in MODEL 230.467

ENGINE 113.995 in MODEL 230.472

Remove/install fan shroud

P20.40-2001-04

Shown on model 220 with M112

1 Fan shroud

2 Coolant line

3 Fastening shackle

4 Retaining lug

Modification notes

22.11.02

Detach coolant line on expansion reservoir - added

Step 5

Remove/install

Danger!

Risk of injury to skin and eyes caused by scalding from contact with hot coolant spray. Risk of poisoning from swallowing coolant.

Do not open cooling system unless coolant temperature is below 90°C. Open cap slowly and release pressure. Do not pour coolant into beverage containers.

Wear protective gloves, protective clothing and safety glasses.

AS20.00-Z-0001-01A

1

Drain coolant from radiator

Engines 112, 113 except engines 113.963 /992 /995

AR20.00-P-1142HA

Engines 113.963/ 992/ 995

AR20.00-P-1142RVK

2

Remove left air intake pipe to air filter

3

Unscrew bolts from retaining tabs (3) on fan shroud (1)

4

Disconnect electric plug connections for suction fan

5

Detach expansion reservoir coolant line on coolant line thermostat housing to engine radiator

6

Detach coolant line (2) at bottom right on engine radiator

7.1

Remove plate attaching ATF line

Models 215, 220

At bottom of fan shroud (arrow).

7.2

Lever off clips at top of fan shroud

Model 230

8

Remove fan shroud (1)

Pull fan shroud with retaining tabs (4) out of retaining lugs on radiator.

9

Install in the reverse order

10

Check coolant level and cooling system for leaks

Engines 112, 113 except engines 113.963 /991 /992 /995

AR20.00-P-1010HA

Engines 113.963 /991 /992 /995

AR20.00-P-1010RVK

Henviste dokumenter