ar2010p3000mfe

Remove/install coolant pump switchover valve

Type ar · emne 20.10 · version 0200 · 2020-03-04

Gælder for: Engine 608 in model 118, 177, 247

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 20 Motorkøling › 20.10 Kølevæskepumpe, kølevæsketermostat — Serie 118 · Serie 177 · Serie 247

EinPAS 15 Motor › 15.25 Motorkølesystem › 15.25.13 ledning/slange/ventil — Serie 118 · Serie 177 · Serie 247

Gælder også for motorer/gearkasser: 608 ***

AR20.10-P-3000MFE

Remove/install coolant pump switchover valve

18.02.2020

Engine

608 in model 118, 177, 247

Modification notes

17.02.2020

Document completely revised.

Remove/install coolant pump switchover valve

P20.10-A069-09

Shown on model 177

1

Coolant line

4

Electrical connector

2

Coolant line

5

Bolts

3

Coolant line

Y133

Coolant pump switchover valve

Warning

Risk of injury. Skin or eye injuries may result when handling hot or glowing objects.

Wear protective gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

Warning

Risk of injury to skin and eyes suffering scalding from contact with hot coolantspray. Risk of poisoning from swallowing coolant.

Do not open cooling system unless coolant temperature is below 90 °C. Open cap slowly and release the pressure. Do not pour coolant into beverage containers.
Wear protective gloves, protective clothing and safety glasses.

AS20.00-Z-0001-01A

Caution

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.

AS00.00-Z-0017-01A

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Topical note

Notes on avoiding damage through contamination and foreign objects

AH00.00-P-5000-01A

Topical note

Notes on coolant

AH20.00-N-2080-01A

Remove/install

1

Drain off coolant.

AR20.00-P-1142MFE

2

Release and disconnect electrical connector (4).

3

Remove bolts (5).

M6

*BA00.10-P-1002-01A

4

Remove coolant lines (1, 2, 3) from coolant pump switchover valve (Y133).

AR20.20-P-7441-01RQ

5

Remove coolant pump switchover valve (Y133) from engine compartment.

6

Install in the reverse order.

7

Read out fault memory and delete if necessary.

AD00.00-P-2000-06MFA

Headless screws: bolts and nuts, coarse-pitch thread

Number

Designation

Model all (4xWD, CAR, smart)

BA00.10-P-1002-01A

M6

8.8

Galvanized

Nm

9

Phosphated

Nm

9

10.9

Galvanized

Nm

13

Phosphated

Nm

12

12.9

Galvanized

Nm

16

Phosphated

Nm

14

Henviste dokumenter