1 Dipstick
2 Crankcase ventilation hose
3 Cable tie
4 Screw
5 Oil dipstick guide tube
6 Sealing ring
P18.40-2133-03
Modification notes
| Remove/install | ||
1 | Open engine hood and raise to vertical position | ||
2 | Drain engine oil | ||
| Engine oil and filter change | ||
3 | Remove oil dipstick (1). | ||
4 | Remove the hose (2) of the crankcase ventilation system | ||
5 | Remove the cable tie (3) at the dipstick guide tube (5) | When attaching the cable tie (3) to the dipstick guide tube (5), pay attention to routing of the cable tie. | |
6 | Remove bolt (4) | | |
7 | Remove oil dipstick guide tube (5) to the top | Installation: Replace the sealing ring (6) of the dipstick guide tube (5). | |
8 | Install in the reverse order | ||
9 | Check engine oil level, correct if necessary. | ||
Danger! | Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the engine as it is running | Secure vehicle to prevent it from moving by itself. | |
10 | Carry out an engine test run and check engine for leaks |
Oil pan
Henviste dokumenter
- ap1800p0101va Motorolie- og oliefilterskift
- ar8840p1000v
- as0000z000501a Fare for ulykke ved automatisk igangsætning når motoren kører. Fare for personskade på grund af knusning og forbrænding, hvis der arbejdes mens motoren startes eller kører