ar8840p1000v

Opening engine hood, moving to upright position and closing

Type ar · emne 88.40 · version 0101 · 2010-12-20

Gælder for: MODEL 171.4, 172.4

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 3 Karrosseri › 88 Monteringsdele, udvendige klapper › 88.40 Motorhjelm, frontklap — Serie 171 (modeller 4**) · Serie 172 (modeller 4**)

EinPAS 35 Karrosseri/ramme/monteringsdele › 35.36 Hjelm/klap/dæksel › 35.36.30 Motorhjelm — Serie 171 (modeller 4**) · Serie 172 (modeller 4**)

AR88.40-P-1000V

Opening engine hood, moving to upright position and closing

8.12.10

MODEL 171.4, 172.4

Opening engine hood, moving to upright position and closing

P88.40-2425-07

Shown on model 171.4

1 Engine hood

3 Locking lever

2 Lever

Open

Danger!

Risk of injury caused by fingers being pinched or crushed when removing, installing or aligning hoods, doors, trunk lids, liftgates or sliding roof

Keep body parts and limbs well clear of moving parts.

AS00.00-Z-0011-01A

1

Pull lever (2) to release engine hood (1)

2

Press locking lever (3) upward and open engine hood (1)

Move to upright position

3

Push engine hood (1) upward at center (arrow) beyond dead center position of engine hood hinges and move to upright position

The engine hood (1) is moved and held in the vertical position by the spring force of the gas pressure struts.

Close

4

Press engine hood (1) down in center (arrow) and lock

5

Ensure that engine hood locks (1) properly

Henviste dokumenter