AR14.40-W-2039C | Attach/remove test facility for checking the AdBlue metering amount on the metering device | 23.11.10 |
ENGINES 900.9 in MODEL 375.1, 970, 972, 975, 976 with CODE (MS4) BlueTec 4
ENGINES 900.9 in MODEL 375.1, 970, 972, 975, 976 with CODE (MS5) BlueTec 5
ENGINES 902.9 in MODEL 375.3, 950.5 /6, 952.5 /6, 953.6, 954.5, 957 with CODE (MS4) BlueTec 4
ENGINES 902.9 in MODEL 375.3, 950.5 /6, 952.5 /6, 953.6, 954.5, 957 with CODE (MS5) BlueTec 5
ENGINES 902.9 in MODEL 375.1, 970, 972, 974, 975, 976 with CODE (MS4) BlueTec 4
ENGINES 902.9 in MODEL 375.1, 970, 972, 974, 975, 976 with CODE (MS5) BlueTec 5
ENGINES 924.9 in MODEL 958.0, 970, 972, 974, 975, 976 with CODE (MS4) BlueTec 4
ENGINES 924.9 in MODEL 958.0, 970, 972, 974, 975, 976 with CODE (MS5) BlueTec 5
ENGINES 925.9 in MODEL 970, 972, 974 with CODE (MS4) BlueTec 4
ENGINES 925.9 in MODEL 970, 972, 974 with CODE (MS5) BlueTec 5
ENGINES 926.9 in MODEL 950.5 /6, 952.5 /6, 953.6, 954.5, 957, 958.2 with CODE (MS4) BlueTec 4
ENGINES 926.9 in MODEL 950.5 /6, 952.5 /6, 953.6, 954.5, 957, 958.2 with CODE (MS5) BlueTec 5
ENGINES 926.9 in MODEL 958.0 with CODE (MS4) BlueTec 4
ENGINES 926.9 in MODEL 958.0 with CODE (MS5) BlueTec 5
W14.40-1370-06
1 Test injection line
2 Test injection nozzle
4 Hose
5 Bottle
6 Cable tie
Attaching | |||
Danger! | Risk of burn injuries and scalding when working at AdBlue lines and the components attached to them. Risk of injury to skin and eyes when handling AdBlue. Risk of poisoning caused by swallowing AdBlue | Only pour AdBlue suitable containers only. Wait until the pressure is released before starting any work on the exhaust aftertreatment system. | |
| Notes on use, material properties and handling of AdBlue® | ||
1 | Open maintenance flap | ||
Danger! | Risk of injury caused by body parts being pinched or crushed as cab is tilted | Ensure that no one is within tilting range of cab as it is being tilted. Always tilt cab all the way to end position and secure with safety strut. | |
2 | Tilt cab | ||
| Notes on tilting the cab | ||
3 | Cover starter with clean rags | Before removing injection line the starter located below must be protected against any dripping AdBlue with a clean rag otherwise the starter and the attached electrical cable sets can be damaged. | |
4 | Remove injection line | ||
5 | Prepare test facility for checking the AdBlue metering amount | ||
| Test facility for checking the AdBlue metering mount of the metering device | ||
6 | Attach test injection line (1) with test injection nozzle (2) to metering device | ||
7 | Connect hose (4) to test injection nozzle (2) and fix in place using a cable tie (6) | ||
8 | Place bottle (5) on the floor | Ensure that hose (4) is not kinked. | |
The check is made with the aid of the STAR DIAGNOSIS. | |||
Removal | |||
9 | Remove test facility on metering device | Clean test facility after use using clear water. | |
10 | Install new injection line | The injection line must be replaced after each removal. | |
11 | Remove rags from starter | ||
Danger! | Risk of injury caused by body parts being pinched or crushed as cab is tilted | Ensure that no one is within tilting range of cab as it is being tilted. Always tilt cab all the way to end position and secure with safety strut. | |
12 | Lower cab | ||
| Notes on tilting the cab |
Henviste dokumenter
- ah1440n000101a Oplysninger om anvendelse og håndtering af AdBlue samt dets stofegenskaber
- ah6080n000301a Oplysninger om tipning af førerhus
- ar1440w2001c
- as1440z000101a Fare for forbrænding og skoldning ved arbejde på AdBlue-rør og dermed forbundne komponenter. Fare for personskade på hud og øjne ved håndtering af AdBlue. Fare for forgiftning ved indtagelse af AdBlue
- as6080z000101a Fare for personskade ved fastklemning og knusning, når førerhuset tippes
- wf5850w144004a