Remove/install AdBlue heater coolant solenoid valve · ar1440b2010a · Mercedes-Benz WIS

AR14.40-B-2010A

Remove/install AdBlue heater coolant solenoid valve

28.10.2019

Engine	924.9 in model 368, 384.0/2, 685.282/284/289/290, 979.2
Engine	926.9 in model 368, 382.17/18, 384.0

Modification notes

20.02.2010

Follow the below work steps only for vehicles with CODE (HV1) AdBlue heating

Model 368, 382.1, 384, 979.2

B14.40-0066-08

1	Upper pipe	4	Coolant tubes	7	Coolant tubes
2	Metering unit	5	Clamp	8	Heating valve of the SCR tank (17Y02)
3	Electric connection	6	Support

 	Remove/install
 Warning	Risk of burn injuries and scalding when working at AdBlue lines and the components attached to them. Risk of injury to skin and eyes when handling AdBlue. Risk of poisoning caused by swallowing AdBlue	Pour AdBlue into suitable containers only. Wait until the pressure is released before starting any work on the exhaust aftertreatment system.	AS14.40-Z-0001-01A
1	Turn off ignition
	Notes on use, material properties and handling of AdBlue®		AH14.40-N-0001-01A
2	Turn off the battery master switch
3	Open the access cover
 Warning	Risk of injury to skin and eyes suffering scalding from contact with hot coolantspray. Risk of poisoning from swallowing coolant.	Do not open cooling system unless coolant temperature is below 90 °C. Open cap slowly and release the pressure. Do not pour coolant into beverage containers. Wear protective gloves, protective clothing and safety glasses.	AS20.00-Z-0001-01A
4	Relieve the cooling system pressure
Topical note	Notes on coolant		AH20.00-N-2080-01A
5	Loosen the electrical connection (3)	 Installation: replace the plastic cable tier.
6	Choke the coolant lines (4,7) using the clamp (5)	 Clamp	*000589543700
7	Loosen the coolant line (4,7) from the heating valve (8)
8	Remove the heating valve from the reservoir (8)	 .SCR tank heating solenoid valve on support	*BA14.40-B-1012-02B
9	Install in reverse order
10	Check the coolant line (4,7) for leak tightness	 Just visual inspection.

 Exhaust gas after-treatment

Number	Designation		Engine 924.9, 926.9 except Liquid Only
BA14.40-B-1012-02B	SCR tank heating solenoid valve on support	Nm	25

000 589 54 37 00

Clamp

ah1440n000101a Oplysninger om anvendelse og håndtering af AdBlue samt dets stofegenskaber
ah2000n208001a Oplysninger om kølervæske
as1440z000101a Fare for forbrænding og skoldning ved arbejde på AdBlue-rør og dermed forbundne komponenter. Fare for personskade på hud og øjne ved håndtering af AdBlue. Fare for forgiftning ved indtagelse af AdBlue
as2000z000101a Risiko for skoldningsskader på hud og øjne pga. sprøjtende, varm kølervæske. Risiko for forgiftning ved indtagelse af kølervæske