ar1330w8000a

Check regulating valve for compressor

Type ar · emne 13.30 · version 0100 · 2009-02-17

Gælder for: ENGINE 541.9 in MODEL 930, 932, 933, 934 with CODE (MZ7) Variable 1-cylinder compressor ENGINE 542.9 in MODEL 930, 932, 934 with CODE (MZ7) Variable 1-cylinder compressor

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 13 Kompressor, remtræk › 13.30 Kompressor (trykluftsystem) — Serie 930 · Serie 932 · Serie 933 · Serie 934

EinPAS 21 bremser/vakuumsystem/trykluftsystem › 21.35 trykluftsystem › 21.35.13 ledning/slange/ventil — Serie 930 · Serie 932 · Serie 933 · Serie 934

Gælder også for motorer/gearkasser: 541 9**, 542 9**

AR13.30-W-8000A

Check regulating valve for compressor

19.1.09

ENGINE 541.9 in MODEL 930, 932, 933, 934 with CODE (MZ7) Variable 1-cylinder compressor

ENGINE 542.9 in MODEL 930, 932, 934 with CODE (MZ7) Variable 1-cylinder compressor

Check regulating valve for compressor

W13.30-1137-09

1 Resonator

2 Cylinder head

5 Banjo bolt

3 Air exit

4 Control line

Remove/install

1

Lower reservoir pressure in the air brake system to about 6.5 bar

The reservoir pressure must be lowered so that the compressor is in the delivery phase for conducting the check.

2

Open maintenance flap

Danger!

Risk of injury caused by body parts being pinched or crushed as cab is tilted

Ensure that no one is within tilting range of cab as it is being tilted. Always tilt cab all the way to end position and secure with safety strut.

AS60.80-Z-0001-01A

3

Tilt cab

Installation: Only tilt cab back after leak test has been conducted.

Notes on tilting the cab

AH60.80-N-0003-01A

4

Remove resonator (1)

Check disassembled resonator (1) through rattling of loose parts on the inside; replace resonator (1) if necessary.

5

Remove control line (4) on cylinder head (2); to do this remove banjo bolt (5)

Installation: Replace sealing rings.

*BA13.30-N-1015-01B

Checking

Danger!

Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the engine as it is running

Secure vehicle to prevent it from moving by itself.
Wear closed and snug-fitting work clothes.
Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

6

Start engine

7

Check on a running engine whether air is streaming out at the air exit (3)

If air is streaming out at the air exit (3) the regulating valve is jammed and the cylinder head (2) must be replaced:

Remove/install cylinder head (2).

AR13.30-W-6010G

8

Check on a running engine whether air is streaming out at the control line (4)

The control line (4) is unpressurized in the delivery phase of the compressor. It only has a pressure applied to it via the pressure regulator as the pressure increases.

If the control line (4) still has pressure applied to it in the delivery phase:

Check function of the air brake system.

9

Install in the reverse order

Compressor (compressed air system)

Number

Designation

Engine 541.9, 542.9

BA13.30-N-1015-01B

Banjo bolt, control line to compressor

Nm

15

Henviste dokumenter