Remove/install guide bearing in flywheel

AR03.30-W-8401J

23.11.10

ENGINES 900.9 in MODELS 375.1, 970, 972, 975, 976

ENGINES 902.9 in MODEL 375.3, 950.5 /6, 952.5 /6, 953.6, 954.5

ENGINES 902.9 in MODEL 957 except CODE (MS8) Natural gas engine

ENGINES 902.9 in MODELS 375.1, 970, 972, 974, 975, 976

ENGINES 924.9 in MODELS 958.0, 970, 972, 974, 975, 976

ENGINES 925.9 in MODELS 970, 972, 974

ENGINES 926.9 in MODEL 958.0

ENGINES 926.9 in MODEL 950.5 /6, 952.5 /6, 953.6, 954.5, 957, 958.2

W03.30-1073-06

Shown as of engine end no. 779068

1 Guide bearing

2 Retaining ring (from engine end no. 779068)

3 Spacer ring

4 Flywheel

5 Crankshaft

Arrow Chamfer

Modification notes

23.6.10	Work procedure completely modified
	"Up to engine end no. 779067, guide bearing (1) without retaining ring (2)" added.	Step 5	AR03.30-W-8401-02A
	"As of engine end no. 779068, guide bearing (1) with retaining ring (2)" added.	Step 5	AR03.30-W-8401-02B
	Special tool added.	Step 5	*900589001500

	Removing
1	Remove clutch	Vehicles with a central clutch release bearing	AR25.10-W-0050C
		Vehicles without a central clutch release bearing	AR25.10-W-0050J
2	Remove guide bearing (1) from flywheel (4)	 Do not remove spacer ring (3).	AR03.30-W-8401-01A
		 Internal extractor	*000589273300
		 Countersupport	*000589343300
	Checking
3	Check spacer ring (3) in flywheel (4) for damage by visual inspection	 If applicable, pull out spacer ring (3).
	Install
4	Install spacer ring (3) in flywheel (4)	 Only if spacer ring (3) is removed due to damage.
		Punch new spacer ring (3) in with new punch on crankshaft (5). Observe installation position of spacer ring (3); the chamfer (arrow) on the spacer ring (3) should point away from the crankshaft (5).
5	Install new guide bearing (1) in flywheel (4)	Up to engine end no. 779067, guide bearing (1) without retaining ring (2)	AR03.30-W-8401-02A
		As of engine end no. 779068, guide bearing (1) with retaining ring (2)	AR03.30-W-8401-02B
		 Drift	*900589001500
	Guide bearing in flywheel changed	As of engine end no. 779068.	BT03.30-W-0007-01A
6	Install clutch	Vehicles with a central clutch release bearing	AR25.10-W-0050C
		Vehicles without a central clutch release bearing	AR25.10-W-0050J

000 589 34 33 00

Drift

Counter stay

Internal puller

000 589 27 33 00

900 589 00 15 00