Install guide bearing in flywheel

AR03.30-W-8401-02A

Install guide bearing in flywheel

Engine

900.9## ## up to 779067, 902.9## ## up to 779067, 904.9## ## up to 779067, 906.9## ## up to 779067, 924.9## ## up to 779067, 925.9## ## up to 779067, 926.9## ## up to 779067

1

Push back sleeve (2) on  drift (1).

2

Slightly grease O-ring on  punch (1).

3

Push guide bearing (3) onto  drift (1) up to the end stop.

 The groove (arrow) should point away from the   punch (1).

4

 Position drift (1) flush with the guide bearing (3) on the flywheel (4) and drive in guide bearing (3) up to end stop into the flywheel (4).

 The installation depth for the guide bearing (3) is determined by the spacer ring (5) installed.

5

 Take off drift (1).