P03.30-2076-06
2 Belt pulley/vibration damper
3 Center bolt
4 Key
5 Crankshaft radial seal
| Remove/install | ||
1 | Open engine hood | ||
2 | Remove front engine cover | See Remove air filter housing. | |
3 | Remove the engine air intake ducts of the air filters | ||
4 | Remove poly-V belt | ||
5 | Install retaining lock for crankshaft/starter ring gear | ||
6 | Remove center bolt (3) | | |
7 | Detach belt pulley/vibration damper (2) by hand | Installation: Align feather key (4). Place belt pulley/vibration damper (2) at crankshaft and using light rotary movements, ensure that the groove of the belt pulley /vibration damper (2) engages with the feather keys (4) of the crankshaft. | |
8 | Inspect tread at hub of belt pulley/vibration damper (2) for scoring and galling by the crankshaft radial sealing ring (5) | If necessary: | |
Replace belt pulley/vibration damper (2) | |||
9 | Replace front crankshaft radial seal (5) | If replacing the belt pulley/vibration damper (2), or if there are leaks at the crankshaft radial sealing ring (5). | |
10 | Install in the reverse order | ||
Danger! | Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the engine as it is running | Secure vehicle to prevent it from moving by itself. | |
11 | Carry out an engine test run and check engine for leaks |
Flywheel, driven plate, vibration damper, starter ring gear
Henviste dokumenter
- ar0320p3000va
- ar0330p5000va
- ar0910p1150va
- ar1322p1202va
- ar8840p1000v
- as0000z000501a Fare for ulykke ved automatisk igangsætning når motoren kører. Fare for personskade på grund af knusning og forbrænding, hvis der arbejdes mens motoren startes eller kører