Replace front crankshaft radial sealing ring

AR03.20-P-3000TS

Replace front crankshaft radial sealing ring

18.1.12

17.1.12

Special tool changed 272 589 00 14 00 in

119 589 01 14 00

Operation step 6

 

Remove/install

1

Turn key in ignition lock to position "0"

2

Remove front engine cover

See Remove air filter housing.

AR09.10-P-1150TS

3

Remove poly-V belt

AR13.20-P-0001TS

4

Install retaining lock for crankshaft/starter ring gear

AR03.30-P-5000TS

5

Remove belt pulley/vibration damper (2)

AR03.30-P-1600TS

6

Press out crankshaft radial sealing ring (5) from mounting bore with a screwdriver

 Do not damage crankshaft and mounting bore. Use a clean rag as a base when pushing out. Leakage can occur otherwise.

 Installation: Install front crankshaft radial sealing ring (5).

AR03.20-P-3000-01B



*119589011400



Checking

7

Check contact surface of crankshaft radial sealing ring (5) at hub of belt pulley/vibration damper (2)

 Check for scoring and galling, if necessary, replace belt pulley/vibration damper (2).

8

Install in the reverse order

9

Check engine oil level, correct if necessary.

 Danger!

Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the engine as it is running

Secure vehicle to prevent it from moving by itself.
Wear closed and snug-fitting work clothes.
Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

10

Carry out an engine test run and check engine for leaks