ad8057s3000a

Shutoff valve, drive authorization system (DAS), diagnosis, function check using actual values

Type ad · emne 80.57 · version 0102 · 2003-06-13

Gælder for: MODEL 638

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 3 Karrosseri › 80 Centrallåsesystem, komfortbetjening, kørselsgodkendelsessystemer › 80.57 Kørselsgodkendelsessystem (FBS) — Serie 638

AD80.57-S-3000A

Shutoff valve, drive authorization system (DAS), diagnosis, function check using actual values

15.8.97

MODEL 638

Drive authorization system shutoff valve (DSV), diagnosis previous knowledge

AD80.57-S-2000A

a

Battery voltage > 9.5 V

With engine running, charge monitoring lamp off, all consumers switched on

b

Complete DAS system (all connectors connected)

c

Connect Hand-held Tester (HHT), read out fault memory

AD00.00-S-2000-03A

d

DSV engine control module and RFL control module correctly identified

Operational checking

Actual value

Scope of test

Operation / requirement

Specified value

Possible cause / remedy

Actual value no. 70

Identification already performed at least once

Identification not yet performed

AD80.57-S-6000A

Actual value no. 71

Identification can no longer be performed, engine control module assigned to vehicle.

Identification can be performed.

AD80.57-S-6000A

Actual value no. 72

Engine control module releases injected volume.

Injected volume not released.
No engine start possible.

, if DAS deactivated

, if DAS activated

AD80.57-S-6000A

Actual value no. 73

Vehicle locked using radio frequency locking or mechanical key. Vehicle cannot be started.

Vehicle not locked.
Prerequisite for start authorization.

, if DAS deactivated

, if DAS activated

AD80.57-S-6000A

Actual value no. 74

Identification is valid.

Teach-in procedure successfully completed. Prerequisite for start authorization.

Identification is invalid.

Teach-in procedure not successfully completed. Perform identification with valid control modules.

AD80.57-S-6000A

Henviste dokumenter