ad8057s6000a

Drive authorization system shut-off valve (DSV) test of electrical system

Type ad · emne 80.57 · version 0102 · 2003-06-13

Gælder for: MODEL 638

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 3 Karrosseri › 80 Centrallåsesystem, komfortbetjening, kørselsgodkendelsessystemer › 80.57 Kørselsgodkendelsessystem (FBS) — Serie 638

AD80.57-S-6000A

Drive authorization system shut-off valve (DSV) test of electrical system

15.8.97

MODEL 638

Connection and use of test equipment

AD00.00-S-1000AZ

Drive authorization system shutoff valve (DSV), diagnosis previous knowledge

AD80.57-S-2000A

Drive authorization system shutoff valve (DSV), arrangement of components

GF80.57-S-0004-01A

The cables, connectors and connections are taken into consideration when testing using the HHT and may have to be separately checked for open circuit, good contact and correct connection as per the valid wiring diagram if a fault is indicated.

Summary of electric wiring diagrams

Model 638

PE82.00-S-1100A

Only disconnect control module connectors with ignition switched off

a

Battery voltage > 9.5 V

With engine running, charge monitoring lamp off, all consumers switched on

b

Complete DAS system (all connectors connected)

c

Connect Hand-held Tester (HHT), read out fault memory

AD00.00-S-2000-03A

d

DSV engine control module correctly identified with RFL

Testing

1

DSV electrical system testing, CAN cables

AD80.57-S-6000-01A

2

DSV electrical system testing, control module

AD80.57-S-6000-02A

3

DSV electrical system testing, start without drive authorization signal

AD80.57-S-6000-04A

4

DSV electrical system testing, drive authorization signal

AD80.57-S-6000-05A

Henviste dokumenter