ad8035s4002a

Immobilizer with transponder (IMM), diagnosis, DTC memory

Type ad · emne 80.35 · version 0102 · 2003-06-13

Gælder for: MODEL 638 up to 28.2.99 with CODE (FZ7) Immobilizer with transponder

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 3 Karrosseri › 80 Centrallåsesystem, komfortbetjening, kørselsgodkendelsessystemer › 80.35 Radiofjernbetjening — Serie 638

AD80.35-S-4002A

Immobilizer with transponder (IMM), diagnosis, DTC memory

12.8.97

MODEL 638 up to 28.2.99 with CODE (FZ7) Immobilizer with transponder

Immobilizer with transponder (WSP), diagnosis previous knowledge

AD80.35-S-2003A

Notes on fault memory, WSP

AD80.35-S-2003-06A

a

Fuses in order.

b

Battery voltage 11-14 V

c

Unlock vehicle with radio frequency remote control.

d

Ignition ON

e

Connect Handheld Tester (HHT) and read out fault memory

AD00.00-S-2000-03A

Fault memory

Fault code

Possible cause

Note

Remedy

Immobilizer indicator lamp -

The indicated fault may not actually be a fault. If despite the fault indication a start enable is issued and the system functions properly, then it is ignored until further notice. The fault in question is a diagnosis fault.

Cable

Malfunction indicator lamp

Instrument cluster

DAS control module

AD80.35-S-6003-05A

Central locking + or convenience locking system fail to respond

Cable

Central locking / convenience locking system control module

ATA control module

DAS control module

AD80.35-S-6003-10A

PWM output + or

-, -//-

The indicated fault may not actually be a fault. If despite the fault indication a start enable is issued and the system functions properly, then it is ignored until further notice. The fault in question is a diagnosis fault.

Cable

Engine control module

Henviste dokumenter