ad8035s3009a

Immobilizer with transponder (IMM), diagnosis, function check using actual values

Type ad · emne 80.35 · version 0102 · 2003-06-13

Gælder for: MODEL 638 up to 28.2.99 with CODE (FZ7) Immobilizer with transponder

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 3 Karrosseri › 80 Centrallåsesystem, komfortbetjening, kørselsgodkendelsessystemer › 80.35 Radiofjernbetjening — Serie 638

AD80.35-S-3009A

Immobilizer with transponder (IMM), diagnosis, function check using actual values

12.8.97

MODEL 638 up to 28.2.99 with CODE (FZ7) Immobilizer with transponder

Immobilizer with transponder (WSP), diagnosis previous knowledge

AD80.35-S-2003A

WSP system description

AD80.35-S-2003-02A

Inhibiting and enabling WSP transmitter keys

AD80.35-S-2003-03A

Inhibiting and enabling of immobilizer with transponder, WSP

AD80.35-S-2003-07A

a

Fuses in order.

b

Battery voltage 11-14 V

c

Unlock vehicle with radio frequency remote control.

d

Ignition ON

e

Connect Handheld Tester (HHT) and read out fault memory

AD00.00-S-2000-03A

Operational check

Actual value

Scope of test

Operation/requirement

Specification

Possible cause / Remedy

Triggering of immobilizer malfunction indicator lamp

Terminal 15

ON

AD80.35-S-6003A

CL/CLS output

CL interface

CL/CLS output not active in diagnosis mode

OFF

AD80.35-S-6003A

Activation status of transmitter key 1-8

Transmitter key enabled / inhibited

Assignment of actual values in control modules with diagnosis identifier 1/00; 2/00; 3/00; 4/00 depending on control-module version

Depending on activation status

AD80.35-S-6003A

Activation status of transmitter key 1-8

Transmitter key enabled / inhibited

Assignment of actual values in control modules as of diagnosis identifier 1/01; 2/01; 3/01; 4/01, depending on control-module version

Depending on activation status

AD80.35-S-6003A

RRC only

Send telegram recognized

Display in HHT in quiescent state at NO

Assignment of actual values in control modules for diagnosis identifier 3/01; 4/01

Short term YES

AD80.35-S-6003A

RRC only

Fixed code valid

Display in HHT in quiescent state at NO

Assignment of actual values in control modules for diagnosis identifier 3/01; 4/01

Short term YES

AD80.35-S-6003A

RRC only

Clock valid

Display in HHT in quiescent state at NO

Assignment of actual values in control modules for diagnosis identifier 3/01; 4/01

Short term YES

AD80.35-S-6003A

Transponder recognized

Ignition: ON, transponder recognized

Assignment of actual values in control modules as of diagnosis identifier 1/01; 2/01; 3/01; 4/01, depending on control-module version

Yes

AD80.35-S-6003A

TEMIC-transponder recognized

Ignition: ON, TEMIC-transponder recognized

Assignment of actual values in control modules as of diagnosis identifier 1/01; 2/01; 3/01; 4/01, depending on control-module version

Yes

AD80.35-S-6003A

Transponder valid

Ignition: ON, transponder conditioned

Assignment of actual values in control modules as of diagnosis identifier 1/01; 2/01; 3/01; 4/01, depending on control-module version

Yes

AD80.35-S-6003A

Transponder read in inhibited

Four times in succession invalid TEMIC-transponder reading

Earliest new value determined 1 min after last ignition switch on

Assignment of actual values in control modules as of diagnosis identifier 1/01; 2/01; 3/01; 4/01, depending on control-module version

No

AD80.35-S-6003A

Random number received by engine control unit

Random number for determining authorization.

The random number is not read out of the FDOC when the transponder is being conditioned.

Assignment of actual values in control modules as of diagnosis identifier 1/01; 2/01; 3/01; 4/01, depending on control-module version

Yes

AD80.35-S-6003A

Engine control unit authorization

Engine control unit authorization received

Assignment of actual values in control modules as of diagnosis identifier 1/01; 2/01; 3/01; 4/01, depending on control-module version

Yes

AD80.35-S-6003A

Engine released

Authorization signal to DAS control module from engine control unit confirmed

Assignment of actual values in control modules as of diagnosis identifier 1/01; 2/01; 3/01; 4/01, depending on control-module version

Yes

AD80.35-S-6003A

Valid key number (transponder)

Assignment of actual values in control modules as of diagnosis identifier 1/01; 2/01; 3/01; 4/01, depending on control-module version

Number of conditioned transponders

AD80.35-S-6003A

Serial code for immobilizer control module

Assignment of actual values in control modules as of diagnosis identifier 1/01; 2/01; 3/01; 4/01, depending on control-module version

Eight-digit serial number of installed control module

AD80.35-S-6003A

Henviste dokumenter