GF54.30-P-2020FA | Settings on workshop level, function | 22.2.08 |
MODEL 203.7 as of model year 09/Modification Year 08 model refinement package
General function requirements
C. 15R On
Function sequence for workshop level settings in general
The workshop level serves the technician in the workshop for reading out vehicle and service data and provides assistance with carrying out the service.
One can access the workshop levels for the instrument cluster (A1) by pressing the instrument illumination variable resistor (A1r1) in the Output menu three times within t < 2 s.
The display in the multifunction display (A1p13) changes to the workshop level.
------------------------------------------------------------------------------------------
It is possible to scroll between the respective menus and submenus (S110s1) or in various lists via the scroll forward and back button.
The following menus are accessible:
Vehicle data
Dynamometer test mode
ASSYST Plus workshop
------------------------------------------------------------------------------------------
Vehicle data
The following data can be called up in this menu:
- Voltage (in V) and amp draw (in A) in on-board electrical system
- Data from instrument cluster
(e.g. version numbers, software releases)
- Engine data (e.g. engine number)
- Oil data (e.g. oil quantity, temperature)
- Vehicle data (e.g. chassis number)
Roller test mode
Activating the roller dynamometer mode prevents faults being entered in the ESP and BAS control unit (N47-5) during brake tests on the roller dynamometer.
It is possible to switch between the following settings in the roller dynamometer mode submenu using the left multifunction steering wheel button group (S110):
- On
- With circuit 15 OFF
If the workshop menu is exited and the roller test mode was not activated again previously, the roller test mode menu is called up automatically during the next ignition sequence (with circuit 15R On).
ASSYST Plus workshop
The following data can be called up in this menu:
- Service data
- Full service
After a service is performed, the service interval is reset in this menu.