ar9710p4000f

Seam sealing following repair

Typ ar · téma 97.10 · verze 0106 · 2002-12-11

Platí pro: MODEL 210

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 3 Nástavba › 97 Utěsnění karosérie, protikorozní ochrana › 97.10 Utěsnění karosérie — Řada 210

EinPAS 40 Konzervace/lakování › 40.20 Ochrana proti korozi › 40.20.30 Těsnění švů — Řada 210

AR97.10-P-4000F

Seam sealing following repair

4.5.95

MODEL 210

Figure item, etc.

Work instructions

Danger!

Vapors and gases from the solvent represent an explosion and poisoning hazard. Injury hazard to skin and eyes when working on corrosion protection agents.

Do not spray corrosion protection agent into open flames or flowing bodies and keep away from fire. Process in well-ventilated rooms, wear respiratory protection.

AS97.00-Z-0001-01A

Corrosion protection

Remove chips; prime welding seams, etc. first. Do not apply sealant on bare sheet metal.

Hollow cavity preservation

AR97.20-P-1500F

Underbody preservation

AH97.20-P-2000-01A

Sealing

After repairs on the body seal spot welds and rivets on both sides

The body connection points can require various additional sealing measures in some cases depending on the scope of repair.

Processing instructions

AR97.10-P-0500-02A

Service Information sprayable seam seal

SI97.10-P-0001A

Seam sealing following repair

Front end damage, Model 210

AR97.10-P-4000-01F

Rear end damage, Model 210.0

AR97.10-P-4000-02F

Rear end damage, Model 210.2

AR97.10-P-4000-02FA

Side damage, Model 210

AR97.10-P-4000-03F

Detachable body components, Model 210

When replacing detachable body components such as doors, etc. also seal seams and beads.

AR97.10-P-4000-04F

Odkazované dokumenty