Remove/install right C-pillar inner section up to character bead

AR63.20-D-0008A

Remove/install right C-pillar inner section up to character bead

14.05.2019

Model

901.32/42/62, 902.32/42/62, 903.02/32/42/62, 904.32/42/62, 905.62

1

C-pillar inner section lower part



Remove

 Warning

Risk of injury caused by performing testing or repair work on airbag or emergency tensioning retractor units.

Store airbag units with deployment side facing up; do not expose to temperatures greater than 100 °C. When working on these units, disconnect the power supply.

AS91.00-Z-0001-01D

Topical note

Notes on performing repair, body work and welding on vehicles with airbags and RTE units

AH91.00-P-0002-01M

Topical note

General information on body repair

AH60.00-N-0001-01A

1

Remove rear seats

2

Remove 2nd door on right

AR72.15-D-1251A

3

Remove right rear outside door sill

AR63.30-D-0005A

4

Remove right C-pillar trim up to crease

AR63.20-D-0006A

5

Remove detachable parts in repair area

6

Cover all detachable parts that remain in repair area

7

Cut off right C-pillar inner section lower part (1)

AR63.20-D-0008-01A

AR64.20-D-0002A

 Cut spot welds

 Spot weld milling cutter

*201589005100



Install

8

Align, grind off connecting plates and coat with zinc dust paint

 Do not yet bend down rear panel

Zinc dust paint suitable for spot welding

*BR00.45-Z-1001-07A

9

Prepare right C-pillar inner section lower part (1) for installation

AR63.20-D-0008-02A

Zinc dust paint suitable for spot welding

*BR00.45-Z-1001-07A

 Danger

The high voltage used for electric welding presents a lethal hazard. Risk of explosion from welding in areas close to highly inflammable materials. Risk of injury from weld splatter and UV-light when welding. Risk of poisoning from inhaling welding gases

Use insulating mats. Wear protective clothing, safety glasses and a protective mask. Remove highly inflammable materials from the hazard area. Use air extraction system.

AS00.00-Z-0007-01A

10

Weld in right C-pillar inner section lower part (1)

AR63.20-D-0008-03A

Topical note

Measures for preventing damage to vehicles or components when performing electric welding work

AH00.00-N-0005-01A

General notes on welding

AH60.00-N-0005-01A

11

Install right C-pillar trim up to crease

AR63.20-D-0006A

12

Install right rear outside door sill

AR63.30-D-0005A

13

Grind off any residue welding material

14

Solder connections

15

Vacuum out hollow cavities


Metal shavings and/or metallic grinding dust in cavities
can lead to corrosion damage.

16

Clean repair area and prime with MB primer filler

17

Supplement standard seals with MB body sealant

AR97.10-D-4000A

White sealing compound, 310 ml, DBL 6069.20

*BR00.45-Z-1003-01A

18

Supplement standard underfloor protection with MB permanent underbody sealant

19

Paint repair area adjacent surfaces

20

Add cavity preserving agent

21

Install 2nd door on right

AR72.15-D-1251A

22

Install the rear seats

23

Reinstall all detachable parts removed

Repair materials

Number

Designation

Order number

BR00.45-Z-1001-07A

Zinc dust paint suitable for spot welding

A 000 986 34 42

BR00.45-Z-1003-01A

White sealing compound, 310 ml, DBL 6069.20

A 001 989 63 20