ar6320d000801a

Separating right inner C-pillar bottom section

Typ ar · téma 63.20 · verze 0105 · 2006-07-26

Platí pro: MODEL 901.32 /42 /62, 902.32 /42 /62, 903.02 /32 /42 /62, 904.32 /42 /62, 905.62 MODEL XD2, XD3, XD4, XD5, XD6, XD7 MODEL 903.62, 904.62 with CODE (ZU9) National version for Mexico

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 3 Nástavba › 63 Boční stěna › 63.20 Sloupky — Řada 901 (modely 32*, 42*, 62*) · Řada 902 (modely 32*, 42*, 62*) · Řada 903 (modely 02*, 32*, 42*, 62*) · Řada 904 (modely 32*, 42*, 62*) · Řada 905 (modely 62*)

EinPAS 35 Karoserie/rám/montované díly › 35.34 Boční stěna › 35.34.45 Sloupek — Řada 901 (modely 32*, 42*, 62*) · Řada 902 (modely 32*, 42*, 62*) · Řada 903 (modely 02*, 32*, 42*, 62*) · Řada 904 (modely 32*, 42*, 62*) · Řada 905 (modely 62*)

AR63.20-D-0008-01A

Separating right inner C-pillar bottom section

Separating right inner C-pillar bottom section

201 589 00 51 00

Spot weld miller

Workshop equipment

WE58.40-Z-1001-03A

Drill (electric/pneumatic)

WE58.40-Z-1003-03A

Angle grinder (electric/pneumatic)

WE58.40-Z-1004-03A

Body saw (electric/pneumatic)

Separating right inner C-pillar bottom section

1 Mark separation line on right C-pillar (3) inner section with the following dimension (dotted line, 2):

a = approx. 160 mm.

2 Cut spot welds out of inner section (3) (areas A, B and C).

3 Separate inner section (3) along separation line (dotted line, 2).

D63.20-0040-03

Separating right inner C-pillar bottom section
Separating right inner C-pillar bottom section

D63.20-0028-02

D63.20-0027-02

4 Cut spot welds out of rear wall (3) (area D).

5 Bend up rear wall (3) and cut spot welds out of console (4) (area E).

Separating right inner C-pillar bottom section

D63.20-0029-12

6 Cut spot welds out of console (4) and inner entry (5) (areas F and G).

7 Grind off welds (6).