1 | Drain plugs |
2 | Cover |
3 | Seal |
4 | Screw |
T43.30-0025-11
Danger ! | Risk of injury caused by touching hot retarder and by scalding from hot retarderoil. Risk of injury to skin or eyes caused by retarder oil escaping under high pressure | Do not carry out any work unless retarder is switched off. Wear suitable protective clothing and safety glasses when working on the hot retarder. | |
| Remove | ||
1 | Have a suitable receptacle for oil ready to hand, remove drain screws (1) and drain off oil completely | ||
| |||
2 | Remove screws (4) | ||
3 | Detach cover (2) together with seal (3) | ||
| Clean | ||
4 | Clean contact surfaces of seal (3) | ||
| Install | ||
5 | Attach cover (2) together with new seal (3) | Ensure the correct installation position of the seal (3) relative to the cover (2). | |
6 | Tighten screws (4) | ||
Observe the tightening sequence. | |||
Bolt, oil reservoir cover at bottom to oil reservoir | |||
7 | Tighten drain screws (1) and pour in oil | ||
|
Odkazované dokumenty
- ap4330g4302oha Provedení výměny oleje hydrodynamické brzdy
- ar4330g006801oha
- as4330z000101a Nebezpečí poranění při dotyku s horkým retardérem a při opaření horkým olejem z retardéru. Nebezpečí poranění kůže a očí olejem retardéru vystřikujícího vlivem vysokého tlaku