Modification notes
Test values for distance and comparison measurements on rear axle
Number | Designation | Model 203 | Model 209 | ||
BE40.30-P-1001-05B | Dimension | H1 | mm | 2 | 4 |
H2 | mm | 1,5 | 3 | ||
H4 | mm | - | - | ||
H5 | mm | 3 | 6 | ||
H6 | mm | 1012 (2) | 1012 (2) | ||
H7 | mm | 738 (2) | 738 (2) | ||
H8 | mm | 1,5 | 3 | ||
H9 | mm | 1,5 | 3 | ||
See picture in | |||||
170 589 00 63 00
168 589 07 63 00
124 589 01 19 00
124 589 02 19 00
Mount
Telescopic measuring rod
Telescopic measuring rod
Set of measurement fixtures
124 589 08 63 00
Connecting pieces
The measuring set 168 589 07 63 00 is designed in such a way, that the measuring bolts, according to the measuring points at the vehicle, can be screwed together out of mounting bolts, extensions and measuring tips.
The configuration of the measuring bolts is shown in the table, where the numbers in the column headed "Measuring bolt configuration" are the special tool end numbers.
For example: 02/06/10 = 168 589 07 63 02 (Mounting bolt)
168 589 07 63 06 (extension)
168 589 07 63 10 (measuring tip)
Distance and comparison measurement | Measuring bolt configuration | Telescopic measuring rod |
H1 | 02/07/10 | 124 589 02 19 00 |
H2 | 02/07/05/socket (a) | 124 589 02 19 00 |
H5 | 02/08/05/socket (a) | 124 589 02 19 00 |
H6 | 02/08/05/socket (a) | 124 589 02 19 00 |
H7 | 02/07/05/socket (a) | 124 589 02 19 00 |
H8 | 02/07/05/socket (a) | 124 589 01 19 00 |
H9 | 02/07/05/socket (a) | 124 589 02 19 00 |
P40.30-2101-11
1 Measure comparison dimension (H1)
Measured from the check bore (K) to the tie rod support on the wheel carrier left to right.
P40.30-2171-11
2 Measure comparison dimension (H2)
Measured from the check bore "K" to the center of the torx bolt head of the front bearing of the rear axle carrier left to right. Unscrew, screw in torx bolts if necessary, check for distortion.
P40.30-2098-11
3 Measure comparison dimensionH5
Measured from the check bore "K" to the center of the torx bolt head of the front bearing of the rear axle carrier left to right. Unscrew, screw in torx bolts if necessary, check for distortion.
P40.30-2097-11
4 Measure distance dimension (H6)
Distance dimension measured to the center of the torx bolt heads between the front bearings of the rear axle carrier.
P40.30-2096-11
5 Measure distance dimension (H7)
Distance dimension measured to the center of the torx bolt heads between the rear bearings of the rear axle carrier.
P40.30-2095-11
6 Measure distance dimension (H8)
Measured to the center of the torx bolt heads between the front and rear bearing of the rear axle carrier.
P40.30-2156-11
7 Measure distance dimension (H9)
Measured diagonally to the center of the Torx bolt heads between the front left and rear right bearing of the rear axle carrier.