Adjust front axle toe

Odkazované dokumenty

AR40.20-P-0264T

10.11.11

MODEL 211.0 /2 /6, 219.3

P40.20-2130-01

Shown on model 211

055  Retaining device

P40.20-2131-01

Shown on model 211 without 4MATIC

10 Tie rod

10f Jam nut

P40.20-2181-01

Shown on model 211 with 4MATIC

10 Tie rod

10f Jam nut

P46.20-2140-11

Arrow Center position of steering

P40.20-2132-11

Shown on model 211

030  Wheel spreader

	Check and adjust
1.1	Switch off the easy entry/exit for the driver seat and steering wheel	Vehicles with memory package (driver seat, steering column, mirrors) code 275
		 Otherwise the driver seat and steering wheel move into a different position if the driver door is opened or closed for example. Damage to the upper frame can occur when the retainer (055) is installed.
		 The system is switched off via the buttons on the steering wheel in the "Comfort" menu of the multifunction display.
2	Swivel the sun visor to one side and fix the steering wheel in the center position using the retainer (055)	 Carefully mount retainer (055), in order to avoid damaging the steering wheel or the headliner.
			*129589012100
3	Check center position of steering gear and steering wheel	 The steering gear is in the center position when the marking on the cap matches the marking on the control valve housing (arrow). If necessary, shift steering wheel, see: 
		Remove/install steering wheel
		Model 211	AR46.10-P-0100T
		Model 219	AR46.10-P-0100TX
4	Insert wheel spreader (030) at the inside of the wheel at the front in the direction of travel	 The elastic bearing of the transverse control arm and steering linkage produces a correspondingly large toe value that is reduced to the correct dimension in the ready-to-drive condition.
		Car chassis measuring device - electronic - with radio frequency (and emergency cable) gotis://F_40.2_01.1
5	Counterhold tie rod (10) at the hexagon and loosen jam nut (10f)
6	Rotate the tie rods (10) to adjust the toe angle.		*BE40.20-P-1001-07A
7	Tighten jam nut (10f)		*BA46.40-P-1002-01E
8	Remove retainer (055)		*129589012100
9	Remove wheel spreader (030)	Car chassis measuring device - electronic - with radio frequency (and emergency cable) gotis://F_40.2_01.1
10	Check bellows for twisting and align if necessary

Front axle toe check values

Number	Designation		Model 211 with 4MATIC	Model 211 except 4MATIC


BE40.20-P-1001-07A	Front axle overall toe-in	°	0° 10' (10')	0° 10' (6')

Front axle toe check values

Number	Designation		Model 219


BE40.20-P-1001-07A	Front axle overall toe-in	°	0° 10' (6')

 Tie rod

129 589 01 21 00

Holding device

Designation

Model
211 except 211.08/09/ 28/29

Model
211.08/09/ 28/29

BA46.40-P-1002-01E

Lock nut, tie rod to inner tie rod