ar4610p0100tx

Remove/install steering wheel

Typ ar · téma 46.10 · verze 0301 · 2008-01-30

Platí pro: MODEL 219.3

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 2 Podvozek › 46 Řízení › 46.10 Volant, sloupek řízení, hřídel sloupku řízení, zámek řízení — Řada 219 (modely 3**)

EinPAS 22 Řízení › 22.15 Servořízení › 22.15.40 Volant/sloupek řízení/krycí trubka/zámek řízení — Řada 219 (modely 3**)

AR46.10-P-0100TX

Remove/install steering wheel

23.1.08

MODEL 219.3

Remove/install steering wheel
Remove/install steering wheel
Remove/install steering wheel

P46.10-2567-01

P46.10-2568-01

P46.10-2570-01

1 Steering wheel

2 Countersunk screw

A45 Fanfare horns and airbag clock spring contact

N135 Steering wheel gear shift signal processing module

3 Electrical connector

Remove/install steering wheel

P46.10-2787-11

4 Vibration damper

4a Bolts

Remove/install

1

Move steering wheel (1) to horizontal position

Front wheels in straight ahead position

2

Remove airbag unit from steering wheel (1)

Vehicles up to 2.3.08 except code (809) Model year 2009

AR91.60-P-0660TX

Vehicles as of 3.3.08 or with code (809) Model year 2009

AR91.60-P-0660RA

3

Remove countersunk bolt (2) while countering the steering wheel (1)

Installation: Replace countersunk bolt (2).

*BA46.10-P-1001-02A

4

Electrical connector (3) of

signal processing module

Detach steering-column column shift (N135)

5

Remove steering wheel (1), passing the airbag unit cables through the opening while doing so

Installation: Assign the recess clearances of the serrations (arrows) in the steering wheel (1) to the markings on the steering shaft.

Checking

6

Check whether a vibration damper (4) is installed

When replacing the steering wheel (1)

Steering wheels (1) are available with vibration dampers (4) only. If a steering wheel (1) is installed without a vibration damper (4), then the vibration damper (4) must be removed from the new steering wheel, undo bolts (4a) to do so.

*BA46.10-P-1005-02A

7

Check fanfare horns and airbag clock spring contact (A45) for damage

When the steering wheel (1) is detached, the fanfare horns and airbag clock spring contact (A45) must not be twisted, otherwise it will be damaged.

Visual inspection, if necessary replace fanfare horns and airbag clock spring contact (A45):

Remove/install clock spring contact

AR46.10-P-0200TX

8

Install in the reverse order

9

Conduct a road test

Tests during the road test:

Turn signal reset

When the steering wheel is offset by more than 1 tooth, satisfactory resetting of the turn signal is no longer guaranteed.

Airbag indicator lamp

The SRS indicator lamp must not light up on full steering lock in both directions.

Steering wheel position (1)

If the steering wheel (1) is crooked, adjust it by max. 1 tooth.

Steering wheel

Number

Designation

Model
219

BA46.10-P-1001-02A

Bolts, steering wheel to steering shaft

Nm

80

BA46.10-P-1005-02A

Bolt, vibration damper to steering wheel

Nm

5

Odkazované dokumenty