Remove/install clock spring contact

AR46.10-P-0200TX

Remove/install clock spring contact

9.1.06

 

Remove/install

1

Remove steering wheel

AR46.10-P-0100TX

2

Remove jacket tube switch module (2)

 Installation: Slide steering column switch module (2) complete with clock spring contact (A45) onto steering column tube and screw in mounting screw.

AR54.25-P-2800-01TX

3

Unscrew bolts (1) from steering column switch module (2)

 Do not operate locking pin (3) as this is the anti-twist lock of the clock spring contact (A45).

4

Remove paneling (7) of steering column switch module (2)

 Installation: Pay attention to correct seating of coverings (5, 6).

5

Unscrew bolts (4) from steering column switch module (2)

6

Remove clock spring contact (A45)

 If the clock spring contact (A45) has been twisted, then it has to be replaced.

 Installation: When fitting the clock spring contact (A45) check for correct seating of the plug contacts on the steering column module (N80) (arrow).



Checking

7

Check the spiral contact coil (A45) for damage

 Visual inspection, if necessary replace clock spring contact (A45).

8

Install in the reverse order