Remove/install bell hub with outer planet carrier

AR35.20-T-0250A

15.6.09

REAR AXLE 748.513/ 524

Remove/install bell hub with outer planet carrier

T35.20-0002-06

1 Rear wheel hub

2 O-ring

3 Bell hub

4 Hexagon socket head screw

5 Brake drum

6 Rear axle shaft

7 Thrust washer

8 Shim

9 Circlip

10 Gasket

11 End cover

12 Screw

13 Oil filler plug

14 Sealing ring

15 Oil drain screw

16 Sealing ring

Modification notes

28.4.05	Bolt, end cover to bell hub steel cover		*BA35.20-N-1001-06H
	Bolt, bell hub to wheel hub		*BA35.20-N-1002-06H

	Removing
1	Remove rear road wheels.		AR40.10-T-1100A
2	Drain transmission oil from planetary hub reduction drive
	Rear axle - oil change		AP35.00-T-3501A
3	Detach end cover (11) from bell hub (3)
4	Remove rear-axle shaft (6)		AR35.30-T-0620A
5	Remove brake drum (5)	 Mark the installation position of the brake drum (5) relative to the bell hub (3). To remove the brake drum (5) it may be necessary to move back the brake at the linkage adjuster.	AR42.10-T-1010B
6	Pry bell hub (3) off the rear wheel hub (1)	 Mark the installation position of the bell hub (3) on the rear wheel hub (1).	AR35.20-T-0250-02A
	Clean
7	Clean the sealing surfaces on the bell hub (3) and rear wheel hub (1)
	Install
8	Install bell hub (3) on the rear wheel hub (1)	 Replace the sealing ring (2) and moisten slightly with transmission oil before installation. Observe the marked installation position of the bell hub (3) on the rear wheel hub (1).
			*BA35.20-N-1002-06H
			*000589642100
9	Install brake drum (5)	 Observe the marked installation position of the brake drum (5).	AR42.10-T-1010B
		 Coat the centering seat on the bell hub (3) with long-life grease.	*BR00.45-Z-1001-06A
10	Install rear axle shaft (6).		AR35.30-T-0620A
	Measure with pointer instrument
11	Check axial play of rear axle shaft (6) and adjust if necessary		AR35.20-T-0250-01A
	Clean
12	Clean the sealing surfaces on the end cover (11) and bell hub (3)
13	Replace gasket (10)
14	Install end cover (11) on the bell hub (3)		*BA35.20-N-1001-06H
			*000589642100
15	Pour transmission oil into the planetary hub reduction drive
	Rear axle - oil change		AP35.00-T-3501A
16	Fit rear wheels		AR40.10-T-1100A

 Hub

Number	Designation			Rear axle 748.513/524


BA35.20-N-1001-06H	Bolt, end cover to bell hub	Cast cover	Nm	45
		Steel cap	Nm	120
BA35.20-N-1002-06H	Bolt, bell hub to wheel hub		Nm	80

Torque wrench

000 589 64 21 00

Repair materials

Number	Designation	Order number
BR00.45-Z-1001-06A	Long-life grease	A 000 989 63 51 11

Odkazované dokumenty