1 | Guide pulley |
2 | Poly-V belt |
3 | Bolt |
W13.20-1019-12
Warning | Risk of injury caused by body parts being pinched or crushed as cab is tilted | Ensure that no one is within the tilting range of the cab as it is being tilted. Always tilt the cab all the way to the end position and secure it with the safety strut. | |
Warning | Risk of injury caused by pinching or crushing when working on springs or spring bodies that are under tension | Use only approved tensioning devices; additionally screen off hazardous area if necessary. Check special tools for damage and proper operation (visual inspection). Wear protective gloves. | |
| Remove/install | ||
1 | Tilt the cab | ||
2 | Remove the right side noise encapsulation on the frame | ||
3 | Remove the noise encapsulation underneath the engine | ||
4 | Loosen the poly-V belt (2) and remove it from the guide pulley (1) | Routing diagram for poly-V belt | |
| |||
Installation: Pay attention to the operating diagram. Check the poly-V belt (2) for wear and damages | |||
In case of wear or damages; | |||
| |||
Replace the poly-V belt (2). | |||
5 | Remove the bolt (3) and remove the guide pulley (1) | Reversion pulley | |
6 | Installation in reverse order |
Odkazované dokumenty
- ap1322b135101a
- ar1322b390202tc
- ar1322b390205tf
- as0000z000101a Nebezpečí poranění přivřením nebo přiskřípnutím při pracích na předepnutých pružinách nebo tělesech pružin
- as6080z000101a Nebezpečí úrazu v důsledku přivření a přiskřípnutí při sklápění kabiny řidiče