Replacing front crankshaft radial seal · ar0320p3000hw · Mercedes-Benz WIS

AR03.20-P-3000HW

Replacing front crankshaft radial seal

27.10.97

ENGINE 601, 602, 603 (except , 602.982)

P03.30-2008-06

A Engines 601.911/921 and engine 601.912, 1st version

B Engine 601.912, 2nd version as of 10/85 and engines 602, 603

C Engine 601.912 in model 124 as of 09/94

Modification notes

1.11.97

Crankshaft radial seal modified

see step 5

 	Removing, installing
1	Remove radiator	Engine 601, 602 in model 124, 201 Engine 603 in model 124, 126, 140	AR20.20-P-3865HW
2	Remove poly V-belt		AR13.22-P-1202HW
3	Remove belt pulley/vibration damper		AR03.30-P-1600HW
4	Remove crankshaft radial seal	 Use a screwdriver to press out, do not damage mounting hole, use clean cloth as a base.
	Crankshaft radial seal at front with reduced radial compressive stress		BT03.20-P-0002-01A
5	Replace crankshaft radial seal (31)	Engines with radial seal, 1st version, engine 601.91/92, 602.91, 603.961/962/970	AR03.20-P-3000-01AW
		Engines with radial seal, 2nd version, engine 602.961/962/982, 603.960/963/971	AR03.20-P-3000-01AX
			*601589031400
			*606589001400
			*611589001400
6	Install in the reverse order
 Danger!	Risk of accident as a result of vehicle starting off when engine running. Risk of injury as a result of bruises and burns if you insert your hands into engine when it is being started or when it is running.	Secure vehicle to prevent it starting off. Wear closed and close-fitting work clothes. Do not grasp hot or rotating parts.	AS00.00-Z-0005-01A
7	Run engine and inspect for leaks

606 589 00 14 00

Insertion tool

Sleeve

601 589 03 14 00

611 589 00 14 00

ar0320p300001aw
ar0320p300001ax Montáž předního radiálního těsnicího kroužku klikového hřídele
ar0330p1600hw
ar1322p1202hw
ar2020p3865hw
as0000z000501a Nebezpečí úrazu při samovolném rozjetí vozidla při běžícím motoru. Nebezpečí poranění pohmožděním a popálením při výkonech prováděných během startování nebo při běžícím motoru
bt0320p000201a