ap1322b1351b

Inspect poly-V-belt for wear and damage

Typ ap · téma 13.22 · verze 0102 · 2018-12-03

Platí pro: Engine 904.9 in model 688.2, 979.0 Engine 904.9 in model 688.2 Engine 904.9 in model 693.1 Engine 906.9 in model 693, 695 Engine 924.9 in model 693.1, 695 Engine 924.9 in model 979.0 Engine 924.9 in model 979.279

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 1 Motor › 13 Vzduchový kompresor, řemenový převod › 13.22 Jednořemenový převod — Řada 688 (modely 2**) · Řada 693 · Řada 695 · Řada 904 (modely 9**) · Řada 906 (modely 9**) · Řada 979 (modely 0**, 279)

EinPAS 15 Motor › 15.18 Řemenový pohon › 15.18.30 Řemen/řemenice/napínací ústrojí/vratná kladka — Řada 688 (modely 2**) · Řada 693 · Řada 695 · Řada 904 (modely 9**) · Řada 906 (modely 9**) · Řada 979 (modely 0**, 279)

Platí také pro motory/převodovky: 924 9**

AP13.22-B-1351B

Inspect poly-V-belt for wear and damage

26.11.2018

Engine

904.9 in model 688.2, 979.0

Engine

904.9 in model 688.2

Engine

904.9 in model 693.1

Engine

906.9 in model 693, 695

Engine

924.9 in model 693.1, 695

Engine

924.9 in model 979.0

Engine

924.9 in model 979.279

Inspect poly-V-belt for wear and damage

1

Drive belt

2

Cranking device

S10

START

S11

STOP

B13.22-0024-06

Check

Warning

Risk of injury caused by body parts being pinched or crushed as cab is tilted

Ensure that no one is within the tilting range of the cab as it is being tilted. Always tilt the cab all the way to the end position and secure with the safety strut.

AS60.80-Z-0001-01A

Warning

Risk of injury caused by pinching and crushing when opening and closing engine hood

No one should be within the swivel range of the engine hood as it is being opened or closed. Always open engine hood all the way to the end position until this engages in the front locks.

AS88.40-Z-0001-01A

1

Tilt the cab

AP13.22-B-1351-01A

In cabs 693.8

AR60.80-B-0010A

In cabs 979.8

AR60.80-B-0010D

Deterioration aspects of the Poly-V belt

Warning

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

2

Tilt the engine hood

AR88.40-B-1000A

In semi-advanced cabs.

3

Check the perimeter of the Poly-V belt (1) for wear or damage

Turning device

*904589046300

Turn the engine with the cranking device (2), in advanced cabs, it is possible to turn the engine with the start and stop switches (S10 and S11).

Replace the worn or damaged drive belt.

Inspect poly-V-belt for wear and damage

904 589 04 63 00

Turning device

Odkazované dokumenty