T00.00-0002-01
Bus
O 350
Inspection
Chassis no.: _________________________________ Job number:______________________________ Date:___________ Kilometer reading: ______________________________ Vehicle license plate no.:______________________________ Confirm that work has been completed by signing. Mechanic:_________________________________________________ |
Check by Customer service adviser | Input condition in order not in order | ||
Check vehicle for damaged paintwork, corrosion or damage caused by an accident | | ||
Date of tachograph inspection | | ||
Oil service | |||
Oil change | |||
| Engine - oil and filter change | yes no | |
Inspection | completed | ||
Check and correct fluid level | Ensure leaktightness. If fluid is being lost in excess of normal consumption, determine cause and remedy - against separate order. | ||
| Manual transmission | Transmission 711.510/511/512/515, 714.100/691 | |
Transmission 714.668/690 | |||
| Air conditioning system - check refrigerant level | Except Konvekta air conditioning with roof heater and timer code HA4, | |
Konvekta air conditioning with roof heater and timer code HA4 | |||
Model 613.455 with Konvekta ACX 641 SAPTCO air conditioning without roof heater code HKB, | |||
| Engine cooling system | | |
Engine | |||
| Set valve clearance | | |
| V-belt: Check condition and retension if necessary 2nd alternator | | |
| Inspect poly V-belt for wear and damage | | |
| Engine mount: Adjust | | |
Check nuts and bolts for firm seating | Tighten if necessary. | ||
| Engine: Exhaust flange | | |
| Chassis and body: - Engine mount on substructure - Flanges of propeller shafts - Bearing brackets on steering idler arm - End crossmember on substructure - Trailer hitch: Front axle: - Control arm attachments, control arm plate, supporting strut levers - Supporting struts, shock absorber mounts, shock absorbers, stabilizer bar Rear axle - Control arm attachments on substructure, stabilizer bar | Model 613.355 with rear axle 745.990/996/997, | |
Model 613.355 with rear axle 745.861, Model 613.455/485 with rear axle 745.862 | |||
Tighten screws and nuts | Observe official torque specifications. | ||
| Chassis and body: Rear axle: - Trailing arm to spring support | Model 613.355 with rear axle 745.990/996/997, | |
Model 613.355 with rear axle 745.861, | |||
| Chassis and body: Rear axle: - Spring support | Model 613.355 with rear axle 745.990/996/997, | |
Model 613.355 with rear axle 745.861, | |||
Model 613.455/485 with rear axle 746.217 | |||
| Remove/install rear axle spring bracket | ||
| Wheels | | |
Final inspection | |||
| Test drive and/or test stand | Pay attention to road safety: Check brakes, steering, tires, illumination and signaling system. | |
Mercedes-Benz Türk AŞ | After Sales Service M/AST | Satış Sonrası Hizmetleri M/AST |
Odkazované dokumenty
- ap0020t0070a
- ap0020t0071b
- ap0020t0073a
- ap0530t0560b
- ap1320t1350a
- ap1322t1351a
- ap1800t0101a
- ap2000t2010a Zkontrolovat, vyrovnat hladinu chladicí kapaliny systému chlazení motoru. Kontrola, vyrovnání (hladiny) antikorozního/nemrznoucího prostředku
- ap2210t2260a
- ap2600t2610a
- ap4010t4070a
- ap8330t8312a
- ap8330t8312ba
- ap8330t8312baf
- ap8330t8312bas
- ar3222t2050ba