AP13.22-T-1351A | Inspect poly V-belt for wear and damage | 3.5.00 |
ENGINE 402, 441, 446 in MODEL NMB613
ENGINE 447, 489 in MODEL NMB671
ENGINE 457.944 in MODEL NMB613.358 /388 /367
ENGINE 457.942 in MODEL NMB671.015 /020 /021 /030 /042 /332 /333
T13.22-0006-01
Shown on model 613.358 with rear axle 745.997, tensioning device for refrigerant compressor poly-V-belt
4 Wear indicator
T13.25-0025-02
Shown on model 613.358 with rear axle 746.217, tensioning device for refrigerant compressor poly-V-belt
4 Wear indicator
| Check | ||
Danger! | Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near engine | Secure vehicle to prevent it from moving. | |
1 | Check position of wear indicator (4) | If there is less than 5 mm play on the wear indicator (4) up to the respective stop (arrows), the poly-V-belt is considered worn out. | |
2 | Check condition of poly-V-belt | To do this, crank the engine in stages using a cranking device and check the entire circumference of the poly-V-belt for wear and damage. | |
Damage patterns for poly V-belt | |||
| |||
3 | Check condition of the V-belt | To do this, crank the engine in stages using a cranking device and check the entire circumference of the V-belt for wear and damage. | |
|
Cranking device
407 589 00 63 00
Odkazované dokumenty
- ap1322t135101a
- as0000z000501a Nebezpečí úrazu při samovolném rozjetí vozidla při běžícím motoru. Nebezpečí poranění pohmožděním a popálením při výkonech prováděných během startování nebo při běžícím motoru