ar6830p4800rk

Remove/install side paneling in trunk

Tür ar · konu 68.30 · sürüm 0101 · 2012-07-11

Geçerli olduğu: MODEL 231

“tr” dilinde mevcut değil; İngilizce gösteriliyor.

Konumu

Fonksiyon grubu 3 Karoseri › 68 İç donanım › 68.30 Kaplama, Çıtalar — Seri 231

EinPAS 37 İç donanım › 37.45 Kaplama › 37.45.34 Bagaj kaplaması — Seri 231

AR68.30-P-4800RK

Remove/install side paneling in trunk

11.6.12

MODEL

231

Remove/install side paneling in trunk

P68.30-3607-08

1

Screw

7

Left luggage compartment lining

2

Retractable partition lock

8

Trunk lid seal

4

Screw

9

Center luggage compartment lining

5

Retaining clip

E18/4

Right luggage compartment lamp

6

Right luggage compartment lining

Remove/install side paneling in trunk

Shown on right side of vehicle

2

Retractable partition lock

3

Electrical connector

6

Right luggage compartment lining

S69/10

Trunk luggage cover "closed" limit switch

P68.30-3608-02

Danger !

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

No parts of the body or limbs should be within the operating area when the components are moving.

AS00.00-Z-0011-01A

Notes on sensor system for trunk lid opening/closing

AH80.61-P-0001-01A

Remove/install

1

Completely close Vario roof

Danger !

Risk of injury. Moving parts can pinch, crush or, in extreme cases even sever extremities.

No parts of the body or limbs should be within the operating area of the mechanism when the components are moving.

AS00.00-Z-0009-01A

2

Positioning trunk lid to assembly position

AR88.50-P-5000-01RK

3

Remove retractable trunk partition

AR68.50-P-3000RK

4

Remove trim from rear end center assembly

AR68.30-P-4785RK

5

Unscrew bolt (1) and remove retractable partition lock (2)

Remove right luggage compartment lining (6) from retractable partition lock (2) until electrical connector (3) on retractable trunk partition closed limit switch (S69/10) is accessible.

6

Disconnect electrical connector (3) from retractable trunk partition closed limit switch (S69/10)

Only when removing right luggage compartment lining (6).

7

Remove bolts (4)

8

Remove retaining clips (5)

9

Detach right luggage compartment lining (6) or left luggage compartment lining (7) from trunk lid seal (8) and unhook from center luggage compartment lining (9).

Installation: Ensure that trunk lid seal (8) is seated correctly.

10

Remove right luggage compartment lining (6) until electrical connector for right luggage compartment lamp (E18/4) is accessible or left luggage compartment lining (7) until electrical connector on left luggage compartment lamp (E18/5) is accessible

11

Disconnect electrical connector from right luggage compartment lining (E18/4) or left luggage compartment lining (E18/5)

12

Remove right luggage compartment lining (6) or left luggage compartment lining (7)

13

Install in the reverse order

Atıfta bulunulan belgeler