AR40.30-D-0402E | Carry out distance and comparison measurements on front and rear axles | 7.6.11 |
MODEL 905.6
D40.30-1101-05
Frame measurement data
BR1 Distance of check bores "k1" from left to right side rail.
BR2 Distance of check bores "k2", "k3" and "k4" from left to right longitudinal frame member.
V1 Distance (diagonal) from check bore "k1" in frame side member to check bore "k2" in opposite frame side member.
V2 Distance (diagonal) from check bore "K" in measuring bridge to check bore "k1" in frame side member.
V3 Distance from check bore "k1" in frame longitudinal member to check bore "k2" in the same frame longitudinal member.
H1 Distance (diagonal) from check bore "K" in measuring bridge to check bore "k3" in side rail.
H2 Distance (diagonal) from check bore "k3" in frame longitudinal member to check bore "k4" in opposite longitudinal frame member.
H3 Distance from check bore "k3" in slide rail to check bore "k4" in the same side rail.
Picture item, etc. | Work instructions | ||
| Frame measurement data for accident measurement | Test values for distance and comparison measurements on rear axle | |
Test values for distance and comparison measurement on front axle | |||
Frame test values | |||
Frame height offset test values Frame height offset measured diagonally across frame using e.g. spirit level (length approx. 1 m). Requirement: Vehicle is level! | |||
Beam trammel | |||
Measuring tips | |||
Measuring cone | |||
Contact arm |
Test values for distance and comparison measurements on rear axle
Number | Designation | Model 905.612/622 | Model 905.613/623 | |||
BE40.30-N-1001-05A | Test value | H1 | Effective dimension | mm | - | - |
max. difference | mm | 4 | 4 | |||
H2 | Effective dimension | mm | - | - | ||
max. difference | mm | 4 | 4 | |||
H3 | Effective dimension | mm | 1945 2 | 2750 2 | ||
max. difference | mm | 3 | 3 | |||
See picture | ||||||
Test values for distance and comparison measurement on front axle
Number | Designation | Model | |||
BE40.30-N-1001-06A | Test value | V1 | Effective dimension | mm | - |
max. difference | mm | 4 | |||
V2 | Effective dimension | mm | - | ||
max. difference | mm | 4 | |||
V3 | Effective dimension | mm | 1461 (2) | ||
max. difference | mm | 3 | |||
See picture | - | ||||
- | |||||
Frame test values
Number | Designation | Model | |||
BE40.30-N-1001-09A | Frame width test value | BR1 | Effective dimension | mm | 860 2 |
Distance of inner side of side rails from one another | 798 3 | ||||
BR2 | Effective dimension | mm | 980 3 | ||
Distance of inner side of side rails from one another | 918 3 | ||||
BR3 | Effective dimension | mm | - | ||
Distance of inner side of side rails from one another | - | ||||
See picture | |||||
BE40.30-N-1002-09A | Permitted deviation of vertical parallelism on left and right in relation to side rail | Frame width | mm | - | |
Deviation | ° ' | - | |||
Height difference, approx. | mm | - | |||
Frame width | mm | 860 | |||
Deviation | ° ' | 0° 20' | |||
Height difference, approx. | mm | 5 | |||
Frame width | mm | 980 | |||
Deviation | ° ' | 0° 18' | |||
Height difference, approx. | mm | 5 | |||