Additional testing during an engine repair on the crankshaft, on the main bearing and connecting rod bearing

AR03.20-G-0002MT

10.1.07

MODEL 000.001 with ENGINE 444.901
Euro 1

MODEL 000.001 with ENGINE 444.901
Euro 2

MODEL 000.001 with ENGINE 447.903
Euro 2

	Checking
1	Remove oil filter element and check slats of oil filter element from outside for metal abrasion and swollen condition	 Only if there is advanced wear or damage to engine components.
	Engine oil and filter change		AP18.00-G-0101MT
2	Replace oil-water heat exchanger	 Only if metal abrasion is present on oil filter element disks or in the engine oil circuit.
		Engine 444	AR18.30-G-1001MTA
		Engine 447	AR18.30-G-1001MT
3	Remove oil pump, disassemble and check for wear through a visual inspection	 Only remove if reinforced metal abrasion was found at oil filter element. If wear is present, replace oil pump if necessary.
		Engine 444	AR18.10-G-6020MTA
		Engine 447	AR18.10-G-6020MT
4	Fill engine oil circuit	 Only if the engine was repaired due to damage to the crankshaft	AR18.00-G-1600MT
5	Replace engine oil and oil filter element	 If metal abrasion or swollen condition of oil filter element (coolant in engine oil circuit).
	Engine oil and filter change		AP18.00-G-0101MT