Model | 375.3 with body 375.820 |
with code DD5 (Cab with high roof) | |
except code EX3 (Provision for fitting telematics) | |
Model | 375.4 with body 375.860 |
with code DD5 (Cab with high roof) | |
except code EX3 (Provision for fitting telematics) | |
except code EX8 (Preinstallation for distance-related toll calculation) | |
Model | 940, 942, 943, 944 with body 944.890 |
with code DD5 (Cab with high roof) | |
except code EX3 (Provision for fitting telematics) | |
except code EX8 (Preinstallation for distance-related toll calculation) | |
Model | 950.5/6, 952.5/6, 953.6, 954.5 with body 940.890 |
with code DD5 (Cab with high roof) | |
except code EX3 (Provision for fitting telematics) | |
except code EX8 (Preinstallation for distance-related toll calculation) | |
Model | 970, 972, 974, 975, 976 with body 972.890 |
with code DD5 (Cab with high roof) | |
except code EX3 (Provision for fitting telematics) | |
except code EX8 (Preinstallation for distance-related toll calculation) |
1 | FleetBoard® vehicle computer |
W82.85-1534-11
| Remove | ||
1 | Disconnect ground line from battery | ||
| |||
2 | Remove footwell cover on front passenger side | ||
| |||
3 | Remove bottom paneling for instrument panel on passenger side | ||
| |||
4 | Remove paneling at top for instrument panel on the passenger side | ||
| |||
5 | Loosen base module and fold out | Do not disconnect electrical leads. | |
6 | Remove instrument cluster paneling | ||
| |||
7 | Release instrument cluster and fold back | ||
| |||
Do not disconnect electrical leads. | |||
8 | Remove center air vent | ||
| |||
9 | Release and fold out center switch panel | ||
| |||
Do not disconnect electrical lines and do not detach wires. | |||
10 | Remove bottom paneling for dashboard on driver side | ||
| |||
11 | Remove left paneling from dashboard | ||
| |||
12 | Remove paneling from left A-pillar | ||
| |||
| |||
13 | Remove implement carrier on driver side | ||
| |||
Do not remove the electrical devices from the implement carrier. | |||
14 | Loosen curtain rail in area of left A-pillar | ||
| |||
Do not remove curtain rail. | |||
15 | Unscrew left screw/bolt for driver sun visor on headliner | ||
16 | Remove cover frame at pop-up roof | ||
| |||
| Install | ||
17 | Retrofit parameterizable special module (PSM) control unit | Only if no parameterizable special module (PSM) control unit is installed. | |
| |||
18 | Retrofitting multifunction antenna | ||
Nut, multifunction antenna to roof | |||
19 | Retrofit FleetBoard® wiring harness while paying attention to the connection scheme | ||
Electrical connection diagram for FleetBoard® telematics when retrofitting | |||
20 | Install "message scroll" switch in an empty switch space in switch panel or in area of center air vent | ||
21 | Connect and install FleetBoard® vehicle computer (1) | ||
22 | Fill out FleetBoard® initial startup form and send by fax | ||
| |||
The FleetBoard® administrator will establish contact after receiving the fax to log on the vehicle in the FleetBoard® server. | |||
23 | Install cover frame at pop-up roof | ||
| |||
24 | Tighten left screw/bolt for driver sun visor on headliner | ||
25 | Secure curtain rail in area of left A-pillar | ||
| |||
26 | Install implement carrier on driver side | ||
| |||
27 | Install paneling on left A-pillar | ||
| |||
28 | Install left paneling on dashboard | ||
| |||
29 | Install bottom paneling for dashboard on driver side | ||
| |||
30 | Fold in and secure center switch panel | ||
| |||
31 | Connect FleetBoard® wiring harness preinstallation to "message scroll" switch | ||
32 | Install center air vent | ||
| |||
33 | Install instrument cluster | ||
| |||
34 | Install instrument cluster paneling | ||
| |||
35 | Fold in and secure base module | ||
36 | Install paneling at top for instrument panel on the passenger side | ||
| |||
37 | Install bottom paneling for instrument panel on passenger side | ||
| |||
38 | Install footwell cover on passenger side | ||
| |||
39 | Connect ground cable to battery | ||
| |||
40 | Activate FleetBoard® telematics platform in vehicle using diagnostic system |
Parts ordering note |
Part no. | Designation | Quantity |
A 970 002 28 99 | FleetBoard® preinstallation parts kit (code EX3) | 1 |
A 930 002 45 99 | FleetBoard® vehicle computer | 1 |
A 970 002 29 99 | Parts kit for double DIN slot frame | 1 |
A 970 002 30 99 | Parts kit for data interface (PSM Truck) | n.B. |
A 970 002 31 99 | Maintenance system (WS) parts kit | n.B. |
Ordering address for operating instructions. Within Germany: Via the After-Sales Portal on the Internet or via e-mail: [email protected], phone: +49-(0) 1805/010-7979, fax: +49-(0) 1805/010-7978. Outside Germany: Please consult the contact person responsible for your market. | ||
6462 2734 76 | FleetBoard® operator's manual in German, English, French, Polish, Czech, Romanian, Bulgarian, Dutch, Italian, Spanish | n. B. |