S91.10-4639-09
Shown on driver's seat in model 470 with code SF1 (Electrically adjustable driver's seat) and code H16 (Seat heating for driver) |
1 | Seat frame | 5 | Retaining clips | 9 | Electrical connector | ||
2 | Hinge covers | 6 | Retaining clips | 10 | Electrical connector | ||
3 | Screw | 7 | Electrical connector | 11 | Electrical connector | ||
4 | Seat belt buckle | 8 | Electrical connector | 12 | Electrical connector |
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
| Remove/install | ||
1 | Remove front seat | ||
2 | Remove front seat backrest padding | ||
3 | Remove inner trim from seat frame | ||
4 | Remove front seat cushion padding |
| |
Model 470, 471 | |||
5 | Remove front seat side airbag | ||
6 | Remove hinge covers (2) from seat frame (1) | ||
7 | Remove retaining clips (5) and electrical line from seat frame (1) | Installation: Check retaining clips (5). | |
If retaining clips (5) are damaged | |||
| |||
Replace retaining clips (5). | |||
8 | Remove seat belt buckle (4) from seat frame (1) | Remove screw (3) to do this. | |
Nut, seat belt buckle to front seat | |||
9 | Remove electrical connectors (7, 8, 9, 10, 11, 12) | Scope of electrical connectors (7, 8, 9, 10, 11, 12) dependent on equipment installed. | |
10 | Remove electrical wiring harnesses from seat frame (1) | To do so, remove retaining clips (6) from seat frame (1). | |
Installation: Check retaining clips (6). | |||
If retaining clips (6) are damaged | |||
| |||
Replace the retaining clips (6). | |||
11 | Install in the reverse order | ||
| Check | ||
12 | Perform function check of all electrical systems on front seat | Scope of function test depends on equipment installed. | |
13 | Perform function check of seat belt and seat belt buckle (4) |